Presonus Audio electronic PreSonus 2008 Channel Faders Changes the channel’s audio level

CONTROLS & CONNECTIONS

•Channel Faders

Changes the channel’s audio level

Move the Channel Fader up and down to increase and decrease the channel’s audio level.

The dB value of boost or attenuation is displayed below the

Channel Fader from –infinity to +6 dB.

A virtual LED meter to the right of each fader displays the post fader level of the channel’s audio.

The peak value in dBFS of the channel’s audio is displayed directly above each channel’s virtual LED meter.

•	Channel Mutes and Solos	Adds the channel to the Mute or Solo bus
		Muting a channel silences the channel’s audio.
		Soloing a channel mutes all other non-soloed channels.
•	Playback Stream Fader

Changes the channel’s audio level

Muting this channel silences the channel’s audio.

Soloing this channel mutes all other non-soloed channels.

This channel is a single stereo playback stream from your DAW. In general, you will use this channel to monitor the main outputs of your DAW, but you can route any single pair of the 16 stereo playback streams to this fader.

21 PreSonus 2008