Rear Panel Features

DM3001X

6 3

1.Power Input - to plug your power plug in before switching on power. See safety precautions on page 3 for proper treatment of power.

2.Voltage Selector – Set this to the appropriate power for your location. If unsure ask your authorized dealer.

3.Phono Inputs – plug your turntables in here.

4.Ground lug - use these connections with your turntables’ grounding cable to avoid signal hum.

5.Stereo/Phono Selector – select the appropriate position for your input device. With phono selected the input signal is fed directly to the DM3001X phono pre-amplifiers so use this input only for turntables. Line level sources will overload the sensitive phono pre-amps. Switch this over to the AUX position for line devices such as CD players and Tape decks.

6.Line Inputs - to connect stereo audio from HiFi VCRs, cassette and reel-to-reel tape decks, DAT machines, CD players, laser discs, tuners, even synthesizers or other mixing consoles.

NOTE: Plug mono audio sources into both Left and Right inputs using a “Y" cable connector.

7.Channel PFL Send – this output contains the PFL signal you hear in your headphones. The send should be plugged into your sampler and the signal returned through one of your inputs.

8.Record Outputs – Plug in your tape deck to record your mix. Audio level is determined by the channel inputs.

9.Zone Outputs – Plug in a sound system for another room or booth monitor.

10.Unbalanced Main Outputs – program output controlled by the Master fader knob.

- The Leader in DJ Technology

Industries

- 8 -

http://www.numark.com