DM1090X
QUICK SETUP DIAGRAM
Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all stereo input sources. Next, connect your microphone(s) and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio sources. Plug your mixer into AC power. Now you are ready to switch everything on. Always switch on your audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices.
SPECIFICATIONS
INPUTS: |
|
Line: | 1 0 kΩ input impedance |
| 90mV rms sensitivity (for 1.22V output) |
Mic: | 10kΩ input impedance unbalanced |
| 2 mV rms sensitivity (for 1.22V output) |
| 78mV rms max input |
Phono: | 47kΩ input impedance |
| 1.8mV rms sensitivity @ 1 KHz |
| (for 1.22V output) |
OUTPUTS: |
|
Line: | 9V rms max |
Headphone Amp: 0.5 watt into 47Ω | |
Distortion | less than 0.01% |
SIGNAL TO NOISE RATIOS* (vs. maximum output):
Line: | Better than 96 dB |
Mic: | Better than 78 dB |
Phono: | Better than 87 dB |
| *JIS - weighted |
FREQUENCY RESPONSE:
Line: | 20 Hz- 22k Hz | ±0.5 dB |
Line: | 20 Hz- 20k Hz | ±0.5 dB |
Phono: | ±1 dB except for controlled attenuation of | |
| @ 20 Hz to reduce rumble and feedback | |
EQUALIZER:
±12dB @ 63.250.1K.5K.17KHz
POWER CONSUMPTION:
10 Watt typical
15 watt with full headphone output
DIMENSIONS:
480mm(W) x 175mm(H) x 95mm(D) 19” (W) x 7” (H) x 4 (D)
WEIGHT: 3.5 kgs, 7.6 lbs
- The Leader in DJ Technology
©1999 | Industries | - 5 - | http://www.numark.com |