Pioneer AVH-P5900D operation manual Operating this unit Radio, Basic Operations

Section

03Operating this unit

Radio

Basic Operations

1 2 3 4

6 5

1Source icon

2Band indicator

3Preset number indicator

4Frequency indicator

5LOCAL indicator

Shows when local seek tuning is on.

6Stereo (5) indicator

Shows when the selected frequency is being broadcast in stereo.

1Touch the source icon and then touch RADIO to select the radio.

2Touch BAND to select a band.

Touch BAND until the desired band (FM1, FM2, FM3 for FM or AM) is displayed.

3To perform manual tuning, briefly

touch c or d.

# You can also perform manual tuning by press- ing o or p.

4To perform seek tuning, keep touching c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly touching either c or d.

#If you keep touching c or d you can skip sta- tions. Seek tuning starts as soon as you release the key.

#You can also perform seek tuning by pressing and holding o or p.

Note

Listening AM radio while an iPod is charged from this unit may generate noise. In this case, turn the iPod charge setting off and noise is disap- peared. (Refer to Switching the iPod charge setting on page 48.)

Storing and recalling broadcast frequencies

You can easily store up to six broadcast fre- quencies for later recall.

!Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory.

1Touch LIST to display the preset list.

2When you find a frequency that you want to store in memory keep touching one of preset tuning keys P1 to P6 until the beep sounds.

The selected radio station frequency has been stored in memory.

The next time you touch the same preset tun- ing key the radio station frequency is recalled from memory.

3Touch ESC to return to the ordinary dis- play.

Note

You can also use a and b to recall radio station frequencies assigned to preset tuning keys P1 to P6.

20 En