WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS
INTRODUCTION:
Congratulations on the purchase of your PM Series Powered Mixer from Wharfedale Professional. The PM Series is available in a choice of two models - the PM 500 and the PM 600. These two mixers have the same specifications except where noted in this manual. The PM Series powered mixers are available as standard in a carpet covered wooden box. The RM version is also available for both models. The RM version comes without the wooden box surround so that the unit can be rack mounted.
In order to get the most satisfaction from your PM mixers, please read this manual carefully.
GETTING STARTED:
1.Before you turn on the main power to the unit, ensure that the Master Output Control is in the OFF position.
2.If you need to connect or disconnect any cables or units, make sur the Power is OFF before doing so.
3.Check that the voltage of the unit matches the AC voltage you will be operating with.
FEATURES:
FEATURES:
PM600 and PM600 RM
•Five Mic and six line input sockets
•Channel six features extra Tape In button
•Digital Delay Section
•Three Band EQ in Master Section
•Tape In
•Record Out
•EFX Return
•EFX Send
•Power On/Off on front of unit for ease of use
•Parallel speaker outputs on rear of unit
•Main line output on rear of unit
•Built in 230 watt power amplifier
•Two band channel EQ
•XLR plus 1/4” input sockets
•Fan cooling system
•Thermal protection
PM500 and PM500 RM
•Four Mic and five Line input sockets
•Channel five features Tape In Button
•Main line output on rear of unit
•Two band Channel EQ
•XLR plus 1/4” input sockets
•Digital Delay Section
•Record Out
•Built in 120 watt power amplifier
•Thermal protection
PM Series Instruction Manual Page 3