SPECIFICATIONS FOR 878HL
Specifications
Element:
Dynamic
Pattern:
Omnidirectional
Frequency Response:
50 to 12,000 Hz
Output Level:
HiZ:
LoZ:
Impedance:
HiZ: 40,000 ohms, matches 100K ohms or greater
LoZ: 400 ohms, matches 125 to 1000 ohms
Switch:
Control: DPDT professional long life leaf switches operated with a simple
Impedance: DPDT slide switch located on underside of the microphone
Cable:
2.1m (7 ft.) of heavy duty four conductor (two shielded) cable
Dimensions:
238mm
Weight:
687 grams
Finish:
Durable molded Cycolac in black with die cast base painted in a complimentary color
IMPEDANCE
The Astatic Model 877HL is a duel impedance microphone. The high impedance position is 40,000 ohms and the low impedance is 400 ohms.
The low impedance position is recommended for long cable length requirements. Cable lenghts of 30.5m (100 ft.) or more can be used in this position without loss of level or deterioration of high frequency response.
CABLE END CONNECTIONS
HI IMPEDANCE: Connect the red lead to the audio input, the black lead and shield to ground, and the white and green to relay control
LOW IMPEDANCE: Connect cable leads red and black to balanced line input, shield to ground, white and green to relay control.
PHASING
Positive pressure (movement of diaphragm inward) will generate a positive voltage
on the red cable lead with respect to the black lead. |
|
| Omnitronics, LLC (“ASTATIC”) hereby warrants that this product will be free of defects in material and workmanship for a period of two years |
| from the date of purchase. In the unlikely event a defect occurs ASTATIC will, at its option, either repair or replace with a new unit of equal or |
| greater value. You should retain proof of purchase to validate the purchase date and return it with any warranty claim. Return warranty claims |
| carefully packed, insured and prepaid to the Service Department at the address listed below. |
| This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to ASTATIC’s instructions or |
| unauthorized repair. All implied warranties or merchantability or fitness for a particular purpose are hereby disclaimed and ASTATIC hereby |
| disclaims liability for incidental, special or consequential damages resulting from the use or unavailability of this product. |
| This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the |
| exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and |
| limitations may not apply to you. |
| Note: No other warranty, written or oral is authorized by Omnitronics, LLC |