Connecting the Cables

CONNECTING A REVOLABS FUSIO N MICROPHONE SYSTEM TO POLYCOM HDX 7000 VIDEO CODEC

1.Connect a Male RCA-RCA audio cable between the “CONF OUT ” port on the

Fusion and the red “Audio Input AUX” port on the HDX 7000.

2.Connect a Male RCA-RCA audio cable between the “CONF IN” port on the Fusion and the red “AUDIO OUTPUT 1” port on the HDX 7000.

3.Connect a Male RCA audio cable between the “Room Out” port on the Fusion and the Speakers.

Note: The speakers used for audio and video conferencing with this configuration must be connected to the Fusion for proper echo cancellation.