Pioneer VSX-59TXi operating instructions No sound, See Connecting your equipment on

Page 100

12Additional information

No sound

Symptom

Cause

Remedy

No sound is output when an

• Improper connections.

• Make sure you have properly connected the component

input source is selected.

 

to the corresponding input on the back of the receiver

 

 

(see Connecting your equipment on page 14).

•Sound is muted or the volume is turned down.

• Press MUTE or adjust the volume accordingly.

• The TAPE 2 monitoring feature is on.

•Press TAPE 2 MONITOR to switch it off (see Monitoring your recording on page 75).

 

• Speakers are turned off or selected

• Press SP SYSTEM A/B to select the proper speaker set

 

improperly with the SP SYSTEM A/B switch.

(see Switching the speaker system on page 80).

 

 

 

 

• The input signal type is incorrect.

• Press SIGNAL SELECT to select the proper input signal

 

 

(see Selecting the input signal type on page 48).

 

 

 

 

• The i.LINK source selected for the main

• Choose a different source or choose a different input

 

room has also been selected as a source in

signal for the main room, such as DIGITAL or ANALOG

 

the sub room.

(see Selecting the input signal type on page 48).

 

 

 

No sound output from the front

• The U-shaped connectors that connect the

• Reconnect the POWER AMP IN terminals to the front

speakers.

POWER AMP IN terminals to the front

channel pre-outs using the supplied U-shaped connectors

 

channel pre outs are not connected.

(see item 8 in Rear panel on page 14).

 

 

 

 

• The front speakers are connected to the B

• Connect the front speakers to the A speaker system

 

speaker system jack.

jacks (see Installing your speaker system on page 26).

 

 

 

No sound from the surround or

• Speaker settings are incorrect. (for

• Check you speaker settings in Speaker Systems on

center speakers.

example, they have been set to NO).

page 58.

 

 

 

 

• The surround and/or center levels are

• Check the levels in Channel Level on page 60.

 

turned down.

 

 

 

 

 

• The surround and/or center speakers are

• Check Installing your speaker system on page 26 to

 

disconnected.

make sure the speakers are connected correctly.

 

 

 

 

• The STEREO listening mode has been

• Choose a surround listening mode (see Listening in

 

selected.

surround sound on page 43).

 

 

 

 

• Speaker system B is selected.

• Select speaker system A (see Switching the speaker

 

 

system on page 80).

•The 2 channel input setting is selected when using the multichannel analog inputs or the USB interface.

•Change the setting accordingly (see Selecting USB and multichannel analog input channels on page 49).

No sound from surround back speakers.

• Surround back speakers are set to NO.

• Set the surround back speakers to LARGE or SMALL

 

(see Speaker Systems on page 58).

•The SB CH mode is switched off.• Set the surround back channel to SB CH ON (see page 50).

• The source is not a 6.1 channel playback

• Choose an Advanced surround listening mode (see

source.

Listening in surround sound on page 43).

 

 

• The surround back speakers are

• Check Installing your speaker system on page 26 to

disconnected.

make sure the speakers are connected correctly.

 

 

• The surround back channel is on the 1

• Connect the speaker to the surround back left channel

speaker setting, and your speaker is

output (Installing your speaker system on page 26).

connected to the right channel output.

 

•The wrong input setting is selected when using the multichannel analog inputs or the USB interface.

•Change the setting accordingly (see Selecting USB and multichannel analog input channels on page 49).

•The SB CH MODE is switched to AUTO and the Dolby Surround EX / DTS ES software you’re playing has no flag to indicate it is 6.1 compatible.

•You can still listen with surround back sound by setting the surround back channel to SB CH ON (page 50).

100

En

Page 99 Page 101
Image 100
Page 99 Page 101
Contents VSX-59TXi Information to User Risk of Electric Shock Do not OpenImportant Safety Instructions Once you have established a comfortable sound level To establish a safe levelDecibel Level Example Features Our philosophyContents Surround Setup menu Using other functionsAdvanced setup Controlling other equipmentChecking the supplied accessories Installing the receiverBefore you start Before you start ChapterUsing the remote control Operating range of the remote controlRecharging the remote control Setting up the remote controlSetting the clock Calibrating the remote control screenPress Clock Setting to set the date Press CalibrateSetting the time-out setting Setting the button alert volumeResetting the remote control Restarting the remote control Locking the remote control2 Remove the battery coverReplacing the lithium-ion batteries Before you start Connecting your equipment Chapter Connecting your equipmentRear panel Connecting your equipment When making cable connectionsConnecting your equipment Connecting your TV AudioConnecting your equipment Connecting a DVD player DVD playerConnecting the multichannel analog outputs STB Connecting your equipment Connecting a VCR or DVD recorder VSX-59TXiConnecting your equipment Connecting other video sources Connecting your equipment Using the component video jacks About the video converterConnecting your equipment Connecting digital audio sources Connecting your equipment Connecting analog audio sources TurntablePortable DVD player, etc Connecting your equipment Installing your speaker system Connecting the speakersPlacing the speakers Bare wire connectionsBanana plug connections Connecting your equipment Connecting antennas FM wire antennaConnecting external antennas AM loop antennaPlugging in the receiver About the AC outletControls and displays Chapter Controls and displaysFront panel Controls and displays ToneControls and displays Display TunedBasic remote control displays Menu / System SetupHome menu screens MuteReceiver menu screens SetupDigital NR Remote control displays for the tuner Remote control displays for other components TV control menu screensOperating menus for additional components TOP Menu Search Mode10 CLR Automatically setting up for surround sound Switch on the receiver and your TVGetting started Getting started ChapterGetting started EnterOther problems when using the Auto Surround Setup Checking the settings on your DVD or other playerPlaying a source Change the receiver input to the source you want to play Listening to your system Listening to your system ChapterAbout the listening modes Listening in surround soundNeo6 Music settings Dolby Pro Logic IIx Music settingsListening to your system Using the Advanced surround effects Using the Home THX modesAdjusting the Advanced Surround effect level Use the Option +/- buttons to adjust the effect levelListening with headphones Listening in stereoPro Logic IIx Movie PRO Logic NEO6 CinemaUsing the Stream Direct mode Press ‘Multi-ch in’ on the remote control Home menu screenSelecting the input signal type AnalogSelecting USB and multichannel analog input channels Listening to high-sampling formatsChannel Press SB CH Mode repeatedly to cycle through Listening to your system Using the surround back channelSurround back channel options Creating a center speaker effect Use the Option +/- buttons to change the settingVSB Auto VSB on VSB OFF Listening to your system Using Hi-bit and Hi-sampling Using Midnight and Loudness listeningUsing the tone control Switching the tone control on or offAdjusting the bass and treble Reducing noise during playbackListening to dual mono soundtracks TrebleUsing the tuner Chapter Using the tunerFinding a station Memorizing station presets Using the tuner Tuning directly to a stationMPX mode Using the tuner Listening to memorized station presetsNaming station presets AbcdefghijklmnopqrstuvwxyzSurround Setup menu Surround Setup menu ChapterMaking receiver settings from the Surround Setup menu Select ‘Surround Setup’ then press EnterSurround Setup menu Speaker SystemsLarge Channel Level Select ‘Channel Level’ then press EnterSpeaker Distance Setting the Acoustic Calibration EQ automaticallyAcoustic Calibration EQ Setting the Acoustic Calibration EQ manually Copying your Acoustic Calibration EQ settingsSelect ‘Manual’ then press Enter Select CUSTOM1 or CUSTOM2 then press EnterHow to interpret the graphical output How to use Professional Acoustic Calibration EQProfessional Acoustic Calibration EQ Using Professional Acoustic Calibration EQ Select a manual setup option and press EnterSelect ‘Professional’ then press Enter If you selected ‘Auto Pro.’, select ‘Start’ and pressSwitch the X-Curve on or OFF CurveUse Cursor left/right buttons to select Select ‘X-Curve’ then press EnterSelect ‘Check’ from the Surround Setup menu and press Enter Checking your surround settingsCycle through the settings screen by screen Using the remote control with other components Recalling preset codesControlling other equipment Controlling other equipment ChapterSelect a setting type Controlling other equipmentPress Learning on the remote setup menu Programming signals from other remote controlsPioneer-1 DVR-7000 Editing remote control button names Press Direct Function on the remote setup menuPress OK to confirm the settings Press KEY Label on the remote setup menuSelect the button you want to rename Press OK when you’ve finishedChoose how you want to change the look of the button Controlling other equipment Multi Operation and System Off Programming a multi operation or a shutdown sequenceUsing multi operations Press OK when you’re finishedFrom the remote control Home menu press Multi OperationSwitching components on and off Using the 12 volt triggerUsing System off System OFFUsing other functions Using other functions ChapterMaking an audio or a video recording Monitoring your recordingUse the Option +/- buttons to adjust the amount of delay Adjusting the delay of a soundtrackWatching video and audio sources independently Using other functions Switch the SD1 Normal Stream Direct modeEnhancing Sacd playback Dimming the displayUsing other functions Switching the speaker impedance Checking your system settingsUsing other functions Resetting the system Default receiver settingsUsing speaker system B Switching the speaker systemUsing speaker system B in another room Other connectionsSelect the ‘ITU-R’ setting from the Speaker Systems menu Other connectionsBi-amping your front speakers SP B ITU-R is selectedUsing the pre-outs Bi-wiring your speakersConnecting additional amplifiers Connecting an external stereo pre-amplifier Multi-room setupMaking multi-room connections Using the sub room controls Using the remote control in the sub roomUsing the remote control in the main room Use the Home menu screen buttons to control the sub roomUsing the i.LINK interface Using the front panel multi-room controlsUse the Master Volume dial to adjust the volume Press ControlAbout Pqls rate control About i.LINKCreating an i.LINK network Using the USB interface Press ‘USB’ on the remote control Home menu ScreenConnecting a PC for Advanced Mcacc output Select ‘PC Output’ and press Enter Advanced setup Advanced setup ChapterMake sure your receiver and TV are both switched on Input Assign menuAssigning the component video inputs Advanced setupAssigning the i.LINK inputs Expert Setup menu Select ‘Expert Setup’ then press EnterAssigning the video inputs Multi in OFF USB OFFOSD Adjustment Bass Peak LevelFunction Rename Dynamic Range ControlOSD Overlay Multi-Room Setting Select ‘Multi-Room Setting’ then press EnterSelect the volume level setting Select the type of IR receiver you’re usingAdvanced setup THX Audio Setup THX Ultra2 Subwoofer SetupSelect ‘THX Audio Setup’ then press Enter Surround Back Speaker PositionOptimizing your speaker setup Basic surround setupAdditional information Additional information ChapterTHX speaker system setup Additional informationAdditional information Troubleshooting PowerSee Connecting your equipment on No sound101 Other audio problems Symptom CauseSettings VideoRemote control JackDisplay Select buttonLink interface Link messagesUSB interface MiscellaneousAdditional information Surround sound formats DolbyWindows Media Audio 9 Professional About THXPCM Pulse Code Modulation Maintenance of external surfaces THX Ultra2 Cinema modeAdvanced Speaker Array ASA THX MusicModeAdditional information Specifications 03J00001 ARB7290-A

VSX-59TXi specifications

The Pioneer VSX-59TXi is a powerhouse in the world of home theater receivers, offering a robust combination of features and advanced technologies that cater to both audiophiles and casual listeners alike. Released as part of Pioneer's Elite line, this receiver has been highly regarded for its outstanding performance and versatility.

One of the standout characteristics of the VSX-59TXi is its ability to handle a wide array of audio formats. Supporting Dolby Digital, Dolby Digital EX, DTS, DTS-ES, and more, this receiver ensures that users experience movies and music in high-quality sound. The 7.1-channel surround sound capability allows for an immersive audio experience, making it ideal for movie enthusiasts and gamers.

At the core of the VSX-59TXi is Pioneer's proprietary technology known as "MCACC" – Multi-Channel Acoustic Calibration System. This sophisticated system automatically calibrates the receiver to the unique acoustics of your room, optimizing speaker placement and sound delivery for the ultimate listening experience. This technology saves users the hassle of manual adjustments, making it accessible for everyone.

The VSX-59TXi is also equipped with advanced video processing capabilities. It features Faroudja DCDi circuitry, which improves video quality for sources such as DVDs and standard-definition video, ensuring that your picture quality rivals that of high-definition formats. With multiple HDMI inputs, component video, and composite video connections, this receiver is versatile enough to accommodate a variety of source devices, including Blu-ray players, gaming consoles, and streaming devices.

Another important aspect of the VSX-59TXi is its robust build quality. Pioneer's Elite line is known for its high-end construction, and this receiver is no exception. The heavy chassis minimizes vibrations, ensuring that sound quality remains pristine, while high-quality components enhance overall performance.

For connectivity, the VSX-59TXi boasts an array of options including multiple optical and coaxial digital inputs, as well as legacy connections for older devices. Its user-friendly interface and remote control allow users to navigate through settings easily, making adjustments simple even for novice users.

Overall, the Pioneer VSX-59TXi remains a compelling choice for anyone looking to invest in a high-performance home theater receiver. With its combination of advanced audio technologies, superior video processing, and a focus on user experience, it continues to impress both in sound quality and functionality. In an era where home entertainment is prioritized, the VSX-59TXi stands out as a capable and reliable choice for elevating audio-visual experiences.
Top Page Image Contents