4.NOMENCLATURE AND FUNCTIONS [Front Panel]
Input level controls
These controls adjust the input level of each channel.
Assign buttons [ST, 1, 2]
These buttons select the output to which the
ST : Stereo output
1: MONO 1 output
2 : MONO 2 output
Assign button cover
This cover protects the assign switch setting from accidental change. It can also be used as a writing block.
Clip indicator [PEAK]
This lamp lights when the signal reaches 3dB below clipping. Adjust the signal level using individual input level controls so that this lamp lights only accidentally.
Mute ON/OFF button [AUTO MUTE]
This button turns on the muting facility when pressed. (The muting indicator will light.) By detecting the signal assigned to the stereo output from channel 1 or 2, the signal assigned to stereo outputs from channel 3 through channel 6 is muted. (The signal assigned to the monaural output is not muted.)
Equalizer controls [EQ : LOW, HIGH]
These controls adjust stereo output signal tone.
LOW : Low frequency adjustment (20Hz, ±15dB shelving)
HIGH : High frequency adjustment (20kHz, ±15dB shelving)
Stereo output level control [STEREO] This control adjusts a stereo output level.
Monaural output level controls [MONO 1, 2] These controls adjust each monaural output level.
Power button and power lamp [POWER]
This button switches power on (the power lamp lights) and off (the lamp is extinguished).
3