![](/images/new-backgrounds/1255999/25599917x1.webp)
Control Elements
Monitor Level
The Monitor Level is controlled with a
Master Fader
This fader features the same potentiometer of the Monitor Level for dynamic mastering purposes and fine tuning the overall level from +10 dB to
Each output channel must be activated by the Fader On switch in the respective Output Trim section to be controlled by the master fader.
With this control’s extremely fine level settings, the engineer can attain every ounce of recording headroom. The result, thanks to these controls of infinite resolution, is an unparalleled excellence in dynamic mastering.
Monitor Level
Master Fader
Output Trims
The Output Trims are based on the same
7 | 0 | 1 |
|
| |
2 | Fader | ||||
|
|
| 3 | On | |
|
|
| 4 | ||
|
|
| 5 | ||
|
|
|
| 6 | |
|
|
| 7 | ||
|
|
| 8 |
| |
|
| 9 |
| ||
| dB |
| 10 |
| |
Lt/o | Trim |
| On |
| |
|
|
|
|
|
8 | 0 | 1 |
|
| |
2 | Fader | ||||
|
|
| 3 | On | |
|
|
| 4 | ||
|
|
| 5 | ||
|
|
|
| 6 | |
|
|
| 7 | ||
|
|
| 8 |
| |
|
| 9 |
| ||
| dB |
| 10 |
| |
Rt/o | Trim |
| On |
| |
|
|
|
|
|
Output
9