Hook Up
Fitting A Module
The fitting and/or exchange of modules should only be carried out by qualified persons. Please read the manual of the RackPack frame. It contains all information needed to fit a module as well as all safety and notes and warnings. If you don‘t have the manual at hand, you can download it like all SPL product manuals from our web site http:// www.soundperformancelab.com.
Symbols And Notes
IN THIS MANUAL A LIGHTNING SYMBOL WITHIN A TRIANGLE WARNS
YOU ABOUT THE POTENTIAL FOR DANGEROUS ELECTRICAL SHOCKS
–WHICH CAN ALSO OCCUR EVEN AFTER THE MACHINE HAS BEEN DISCONNECTED FROM A POWER SOURCE.
AN EXCLAMATION MARK (!) WITHIN A TRIANGLE IS INTENDED TO MAKE
YOU AWARE OF IMPORTANT OPERATIONAL ADVICE AND/OR WARNINGS
THAT MUST BE FOLLOWED. BE ESPECIALLY ATTENTIVE TO THESE AND
ALWAYS FOLLOW THE ADVICE THEY GIVE.
The symbol of a lamp directs your attention to explanations of impor- tant functions or applications.
Attention
Do not attempt any alterations to this machine without the approval or supervision of SPL electronics GmbH. Doing so could nullify com- pletely any and all of your warranty/guarantee rights and claims to user support.
Scope Of Delivery
The scope of delivery comprises:
•The module
•This manual
•Four Philips screws to mount the module to the back panel (if mo- dule is delivered separately from the frame). Further screws needed for mounting the module remain when you remove front and rear covers from the RackPack frame.
6 | RackPack: Preference Mic Pre |