Audio-Technica PRO88W owner manual Power Source, Transmitter Operation

Page 4

Operation

Power Source

The transmitter and receiver are each operated by a 9V alkaline battery. Before use, install a battery as shown. Make certain the battery is fully seated in its compartment so the cover slides in place easily. Battery life with alkaline batteries is approximately 8 hours of operating time. The receiver also features an external jack for connecting a 9V DC power supply (not included).

Ribbon for battery removal

9V DC battery

Battery compartment cover

Note: To avoid possible damage due to leakage, the batteries should be removed if the PRO 88W will not be used for a long time.

Transmitter Operation

Each unit provides two selectable transmitting frequencies.

1)Switch the Channel Selector Switch to the desired channel (A or B).

2)The belt clip on the back of the unit clips the transmitter onto a belt, or the transmitter simply can be put into a pocket.

3)Plug the microphone into the Mic Input Jack.

4)The microphone can be clipped to a necktie or other clothing, using the supplied clothing clip.

5)Slide the power ON/OFF switch to the ON position (the LED indicator will light).

4

Image 4
Contents PRO 88W Features and Controls RF InterferenceReceiver TransmitterOperation Power SourceTransmitter Operation Receiver Operation Helpful HintsBelt Clip MountingMounting on a Camera PRO 88W Specifications One-year Limited WarrantyAudio-Technica U.S., Inc