●Winding the Strings
1 Before you string the instrument, set the adjuster so that it is in the middle of its adjustment range. (All adjusters)
2 Place the ball (on the end of the string) in the notch on the adjuster. Make sure the ball is properly inserted in the adjuster’s notch.
String
Ball
The adjuster should be set to the middle of its adjustment range.
Adjuster’s notch
3 At a point about 2 cm from the string’s end, bend the string at a right angle and insert the end into the hole in the tuner. While pulling the string toward the bridge to maintain string tension, turn the tuner machine to wind the string around the tuning post. Make sure the string is wound toward the base of the post as shown in the illustration below.
Insert the string’s | Wind the string |
end into this hole |
String
[Looking from the front]
3rd string (G)
2nd string (D)
1st string (A)
4th string (C)
10