Yamaha SV120S, Sv 120 owner manual Using the Controls, The Reverb

Page 11
Using the Controls

Using the Controls

1 Slide the POWER switch, located on the rear of the instrument, to its ON position. The lamp will light green.

2 Connect the stereo earphones to the PHONES jack on the side of the instrument, make sure that the L & R side earphones are used in the correct ears.

3 Rotate the VOLUME dial to the desired playing level.

Lights green

Do not operate at high volume levels when using earphones. Doing so can lead to irreparable damage to your hearing.

The Reverb

The Silent Violins incorporates Yamaha’s DSP reverb technology. Play while trying out the three types of reverb.

1 Slide the POWER switch to the REV. ON position, the lamp will light red, and reverb will be applied to the Silent Violin’s sound.

2 Slide the REVERB switch to select one of the three reverb modes.

Lights red

ROOM mode ........ this reverb simulates the natural reverberation found in a room.

HALL 1 mode ...... this reverb simulates the natural reverberation found in a hall.

HALL 2 mode ...... the same reverb simulation as HALL 1 but with a longer decay time.

11

Image 11
Contents Congratulations ContentsOwner’s Manual SV120/SV120SCANADA SPECIAL MESSAGE SECTIONPLEASE KEEP THIS MANUAL FCC INFORMATION U.S.AHandling and Transport Turn Power OFF When Making ConnectionsCleaning LocationSV120S Main Body/AccessoriesThe supplied battery is for SV120Neck 2nd string A 1st string E Frame Bridge seat Adjuster NomenclatureFront Tuning peg Nut Fingerboard 4th string G 3rd string D Body BridgePOWER switch ControlsVOLUME REVERB switchthe bridge and then proceed with tuning SetupTuning Winding the Strings The Shoulder RestThe Bow supplied with the SV120S Changing Strings5 Finally, use the adjuster to fine tune the strings Supplying AC Power Power SupplyUsing Batteries The Reverb Using the ControlsStereo Earphones or Connecting External DevicesPower Adaptor Option Electric Outlet DC-IN LINE OUT PHONES AUX IN Silent ViolinLINE OUT jack AUX IN jackSpecifications