Yamaha SGV Series Adjust the Arm Tension, To make the arm tighter, To make the arm looser

Page 10

Adjust the Arm Tension

Use the tension adjustment screw, located on the side of the tail piece, to adjust the tension that holds the tremolo

arm in place.

Insert the supplied Allen wrench into the tension adjustment screw on the side of the tail piece, and adjust the tension that holds the arm in place.

• To make the arm tighter.

→Turn the Allen wrench to the right (clockwise).

• To make the arm looser

→ Turn the Allen wrench to the left (counter-clockwise).

Tension adjustment screw

To make the arm tighter

→Turn to the right (clockwise)

To make the arm looser

→Turn to the left (counter-clockwise)

10

Image 10

Contents SGV Series Care and Maintenance SGV800 Nomenclature Master Volume Master Tone SGV700/SGV300 NomenclatureTruss Rod Adjustment Procedure Adjusting String Height Action 1st string 2.0 +/- 0.2mm 6th string 2.5 +/- 0.2mmBridge Saddle of SGV 300/800 Electric Guitars Setting the Intonation If the tail section is raised Angle Adjustment for the Tremolo UnitIf the tail section is lowered To make the arm tighter Adjust the Arm TensionTo make the arm looser Service Yamaha Corporation of America Guitar Service DepartmentQC55690 R1