Yamaha Silent Piano owner manual Error Chime, USB memory does not respond

Page 23

☞The USB memory does not respond.

-Remove the USB memory from the unit and then reinsert it.

-Check that the PLAY/STOP lamp blinks orange when you insert the USB memory. If the lamp does not flash, the USB memory may be broken (see page 11).

☞When I turn the power on with the instrument in demonstration mode and USB memory inserted into the USB terminal, the internal demonstration songs play for a short while before playback of the songs in stored in the USB memory begins.

-This is not a fault. This unit may take some time to recognize certain kinds of USB memory. The internal demonstration songs play during the recognition process.

☞USB data does not play back.

-This is not a fault. In some cases the MIDI file for the song may be too large for the unit to load, resulting in an error.

The Error Chime

In the event of the following errors occurring, the REC and PLAY/STOP lamps blink rapidly and a chime sounds 3 times in succession. Press the REC or PLAY/STOP buttons to stop the error chime.

•The USB memory is damaged and cannot be accessed.

•Song data is damaged.

•A file is too big for the unit to read.

•The power was turned off while the unit was processing information, resetting internal memory to its default settings. Any song you recorded and stored in the internal memory of this unit has been erased.

•The USB memory has insufficient space remaining and cannot save your song.

•The USB memory is write-protected.

English

19

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 操作說明書 Important Notice for the United Kingdom Applies to power adaptor Connecting the Plug and CordEnglish Please Keep this Manual Getting Started ContentsAccessories InstallationConnecting the AC Adaptor Attaching the Headphones HangerControl box-Bottom panel/Rear panel Part NamesControl box-Front panel To Begin Playing Using the Silent Piano FunctionTurn the power on Adjust the volume with the Volume controlC4-A4 Voice name Setting methodSelecting Voices Voice VariationPress two keys simultaneously to select two voices Adjusting the BrillianceOperation Setting method Dual VoiceF2 Stage Setting the Amount of ReverbAdjusting the Pitch Tuning Reverb type Effect Setting methodReturning Settings to Their Default Configuration Reset All Setting the DDE Dynamic Damper EffectRecording a Performance Recording and PlaybackTo fast-forward Playing Back the Song Recorded in Internal MemoryTo stop playback To pause playbackInsert the USB memory into the unit Connecting the USB MemorySaving Recorded Data to USB Memory Playing Back Songs from USB Memory To select the song for playback Direct Song Selection Playing Back Demonstration Songs Demonstration ModeTo exit demonstration mode To change songs To set the unit in repeat modeWhen connected to an MD recorder or cassette deck Connecting to Other DevicesConnecting to Other Audio Devices Example Using AUX OUTExample Using AUX When connected to other Midi device Connecting to Other Midi DevicesExample Using Midi OUT Example Using MidiAppendix TroubleshootingUSB memory does not respond Error ChimeVoice name Assigned key Explanation Variation Preset Voice ListNo. Key Title / Composer Demonstration Song ListVoice name Midi Data Format Program ChangeMidi File Playback Sequence USB to Device SpecificationsRecognized Remarks FunctionBox 3, Hamamatsu, 430-8651 Japan
Top Page Image Contents