Pantheon Navigation

PANTHEON™ NAVIGATION

SELECTING A PRESET

Pantheon comes complete with 35 factory presets to choose from. These presets are designed for a variety of reverb applications such as placing the sound into a hall, chamber or room, vocal plates, or for adding just a touch of ambience to your project. To select presets, do the following:

1.Click the arrow to the right of the Preset field in the Pantheon's plug in window.

2.Click on your desired preset and it will now become active.

EDITING AND SAVING A PRESET

Once a preset is selected, use Pantheon’s sliders and knobs to adjust the individual parameters to the desired settings. If Pantheon is inserted in line with a track, set the reverb Level slider to 0dB and control the ratio of reverb to dry signal using the reverb Mix slider. If Pantheon is inserted in an auxiliary bus, set the reverb Mix slider to 100% and the reverb Level slider to 0dB. Control the ratio of reverb to dry signal using the auxiliary send and return controls in your recording application.

Once a preset has been edited to your liking, you can save the changes as a User preset. To store changes and create a User preset, select the Save function in the Pantheon's plug-in window.