Yamaha PSR-295, PSR-293 Close the window to end the Musicsoft Downloader, Click the Flash Memory

6 A copy of the selected MIDI song file will appear in the “List of files stored tempo- rarily” at the top of the window. The flash memory medium will also be displayed at the bottom of the window to specify the des- tination for the transfer. Click the flash mem- ory.

q Click the “Flash Memory”

7 After selecting the file in the “List of files stored temporarily”, click the downward [Move] button and a confirmation message will appear. Click [OK] and the song will be transferred from the “List of files stored tem- porarily” to the instrument’s flash memory.

8 Close the window to end the Musicsoft Downloader.

NOTE

•Quit the Musicsoft Downloader to play back the song transferred from your computer.

9 To play back a song stored in flash memory, press the [SONG] button. Use the dial to select the song you want to play, then press the [START/STOP] button to start playback.

CAUTION

•Do not unplug the USB cable during a data transfer. Not only will the data not be transferred and saved, but operation of the memory media may become unstable and its contents may disappear com- pletely when the power is turned on or off.

CAUTION

•Stored data can be lost due to equipment malfunction or improper operation. For safety we recommend that you keep a copy of all important data stored on your computer.

•We recommend that you use a power adaptor rather than batteries when transferring data. The data can be corrupted if the batteries fail during the transfer.

Connecting To a Computer Reference

●To Use transferred Songs For Lessons

In order to use songs (only SMF format 0) trans- ferred from a computer for lessons it is necessary to specify which channels are to be played back as the right-hand and left-hand parts. The procedure for setting the “guide track” is as follows:

1Press the [SONG] button and select the song (036 –) residing in flash memory for which you want to set the guide track.

2Press the [FUNCTION] button.

3 Use the CATEGORY [f ] and [r ] buttons to select the R-Part or L-Part item.

4Use the dial to select the channel you want to play back as the specified right- or left-hand part.

We recommend that you select channel 1 for the right-hand part and channel 2 for the left-hand part.

DGX-205/203, PSR-295/293 Owner’s Manual 69