PX5D EasyStart
Program memory buttons:
You can assign four of your favorite programs to the Program Memory Buttons (A, B, C, D)…
1.Use the CURSOR UP/DOWN buttons to select a program to assign to memory button A.
2.Press and hold the “PROGRAM MEMORY” button for approximately one second – the display will indicate “PGM>A”, and the selected program is now assigned to button A.
Edit Mode:
In Edit mode, you can change the presets to create your own custom programs, by tweaking the effect types and parameters, and mixing and matching amp and cabinet models. Once you’re satisfied with your edits, you can save the new program as one of 100 available locations for user programs. Here’s how…
Add the Intelligent Pitch Shift effect to a program and store it, add a minor3rd up in the key of “A”:
1.Go to the MOD effect block using the CURSOR > button, and then use the CURSOR UP/DOWN buttons to select
“MIN3UP”. Adjust the effect parameter (key) using the VALUE encoder set to “A” for this example.
Now to name and save the edited program:
2.Press the CURSOR > button five times (from the MOD) and edit the name‐ the VALUE encoder changes characters ‐ the CURSOR UP/DOWN buttons will select between characters. When you finish editing the name …
3.Press the CURSOR > button and the display will indicate “WRITE”, Press the ENTER/REC button to save.
Note: | While in the “WRITE” dialog page, you can change the edited program’s location number (U00‐U99) with the |
| VALUE encoder ‐ before pressing ENTER/REC. |
Rhythm and Bass Mode:
The PX5D provides 128 different rhythm and bass patterns, each with six variations. Add eight metronome patterns, each with three variations – and that totals 744 available patterns to work with – covering just about any style you might need!
The Rhythm and Bass Mode is made up of three types of play:
•PTN: Here, you can select one rhythm patter to jam along with
•Chain Play: This mode allows you to chain up to 16 patterns to create a song
•Song Play: Here, you can play the demo songs
Listen to the demo songs:
1.From Play mode, Aux pitch mode or Phrase Trainer mode, press the RHYTHM button to enter Rhythm and Bass mode. (not available when Mute, bypass or Key Lock are on)
2.Press the RHYTHM button until the display indicates “SONG”.
3.Use the VALUE encoder to select between the 3 practice songs to play back.
4.Use the CURSOR < > buttons to select a parameter such as TEMPO, TRANS, LEVEL, REVERB, LOOP and then use the VALUE encoder to set the value. (Example: TEMPO is the parameter and 162 is the value)
Selecting “LOOP” will allow you to playback the song repeatedly – set to “On” to turn loop on, and set to “OFF” so that the song only plays once.
3