Mackie SR244 specifications Specifications, SR324

Page 6

SPECIFICATIONS

CONFIGURATIONS

SR24•4: 24x4x2x1, 20 mono channels with mic preamps and line inputs, 2 stereo chan- nels with line inputs only

SR32•4: 32x4x2x1, 28 mono channels with mic preamps and line inputs, 2 stereo chan- nels with line inputs only

CHANNEL STRIP

Trim control: 10dB attenuation to 40dB gain, line inputs; 10-60dB gain mic inputs

6 mono aux sends: 1 & 2 pre- fader, 3 & 4 switchable pre/post, 5 & 6 post-fader

Hi shelving EQ: 12kHz, ± 15dB

Midrange EQ (mono channels):

100Hz-8kHz swept peaking mid, ±15dB

Midrange EQ (stereo channels):

3k fixed Hi mid, 800Hz fixed Lo mid, ±15dB

Lo shelving EQ: 80Hz, ± 15dB

Lo cut filter: 75Hz cut-off, 18dB/ octave (mono channels only)

Constant loudness Pan (mono channels), Balance (stereo channels)

–20dB Signal Present LED, Over- load LED, Mute/Solo LED

Solo (AFL/PFL switchable via master section)

1–2 & 3–4 Submix Assign and L/R Main Mix Assign switches

60mm logarithmic-taper faders

MASTER SECTION

• 6 aux send masters with individual

Solo switches, 10dB max. gain

• 4 stereo aux returns, 20dB max.

gain. Aux 4 assignable to Subs

1–2 or 3–4

• Aux Return 1 & 2 foldback to Aux

Send 1 & 2, respectively (EFX TO

MONITOR), 15dB max. gain

• Global Aux Return Solo switch

6 Aux Send Solo switches

Master Solo LED (“Rude Solo Light”)

13-segment LED metering

SOLO section: Level control with 15dB max. gain, AFL (SIP)/PFL switch, Aux & Sub Solo LED indicators

TALKBACK section: Level control, Main Mix & Aux 1–2 assign switches, Talkback LED indicator, balanced dynamic mic XLR input on rear panel

Tape return level control, Tape Return To Master switch

Phones/Control Room level control

Submix buses: AIR HF peak- ing EQ, Pan control, L/R assign

REAR PANEL

All inputs and outputs balanced/unbalanced (except channel inserts & RCA jacks)

INSERTS: all mono channels, submix buses, main L/R mix

INPUTS: balanced mono line & mic (mono channels)/balanced stereo line (stereo channels), balanced stereo aux returns, RCA-type stereo tape returns, XLR talkback mic

OUTPUTS: 1/4” TRS Main L/R, XLR Main L/R, XLR Mono Main with output level control, stereo Control Room, Headphones (2), Submix (double-

bussed for easy use with 8-track recorders), mono Aux Sends, RCA- type stereo Tape Send

Global phantom power switching

(48V)

DIMENSIONS

SR24•4: H*xWxD: 5.65”x31”x19.2” (143.5x787.4x487.7mm), Weight: 31 lbs.

SR32•4: H*xWxD: 5.75”x39.25”x19” (146x997x483mm), Weight: 40.7 lbs

* Maximum height at rear panel

 

 

18.90"

 

 

2.80"

 

 

5.60"

1.80"

1.30"

2.80"

 

 

0.50"

 

 

19.20"

31.00"

19.20"

SR24•4

39.25"

19.20"

SR32•4

®Mackie Designs Inc. is engaged in a continuous program of prod- uct evaluation and improvement and reserves the right to change

product specifications at any time without notice. ©1996-1998 Mackie Designs Inc. All rights reserved. Rev. 2/98 “Mackie.,” VLZ, and the “Running Man” figure are registered trademarks of Mackie Designs Inc.

MACKIE DESIGNS INC.

16220 Wood-Red Road NE • Woodinville, WA 98072 USA

Toll-Free 800/258-6883 • FAX 425/487-4337

Outside the U.S., Phone 206/487-4333 • FAX 425/485-1152

Image 6
Contents Durability. a word Mackie lives by Sound Reinforcement Consoles24 or 32 in, 4 x 2 x 1 out SR324/SR244Recording flexibility VLZWearing Contact material Cious outlet spaces and can get lost or damaged, so As those on our 8Bus conPro features even Amateurs can Understand Kathleen, GASpecifications SR244SR324