Limited Service Fire Pump Controller

still timing, the CR relay remains energized and the motor continues to run for the duration of the timer setting.

Pressing the STOP push button stops the motor even if TR1 is timing. If the Controller does not have a TR1 timing relay, the pump motor runs until the STOP push button is pressed.

Manual Local Start - Pressing the START push button energizes relay LRSR. The LRSR contacts close to latch the LRSR relay and energize the M1 contactor coil to start the motor. The motor runs until the STOP button is pressed to de-energize the LRSR coil.

Manual Stop – Connecting the jumper wire between TB2-4 and TB2-5 bypasses the TR1 timing relay contacts. When this jumper is installed, the motor runs until the STOP button is pressed.

Remote Start - The remote start circuit requires the closure of remote contacts to start the motor. Closing the remote contacts energizes the LRSR relay. The LRSR contacts close and latch the LRSR relay until the STOP button is pressed.

Deluge Valve Start – A normally closed remote switch energizes the optional deluge valve relay (DVR). Opening the remote switch de-energizes the DVR, closing the DVR contacts in parallel with the PS contacts, to energize the CR relay and the TR1 timing relay. When the remote switch closes, the DVR contacts open to de-energize the CR relay and stop the motor, if TR1 has timed out.

Lockout – (This feature is not allowed per NFPA 20 and is permitted only when acceptable to the authority having jurisdiction.) The lockout circuit requires the closure of remote contacts to stop the motor. Closure of the contacts energizes the LK relay. Contacts LK open to de- energize the CR relay and stop the motor. If the remote contacts open while the pressure is low, the motor restarts.

EMERGENCY MANUAL CONTROL - The emergency start handle should only be used if the Controller fails to start automatically or with the START push button. The motor runs until the handle is returned to the OFF position or the CIRCUIT BREAKER is opened. To start the motor when control power is not available, push the T-handle in and rotate counterclockwise (45°) to lock in the full ON position in a fast and continuous motion.

Caution: Failure to engage the handle in a fast and continuous motion can result in damage to the contactor and failure to start the motor.

Pump Run Contacts - The pump run contacts transfer any time the M1 contactor is closed by either electrical or mechanical means.

Phase Loss Contacts - The phase loss contacts transfer when line or control power is lost or the line voltage drops more than 15 percent.

Phase Reversal Contacts - The phase reversal contacts transfer when there is a phase reversal, rotation other than A-B-C.

Page 6 of 12

LX-1500 specifications

The Hubbell LX-1500 is a cutting-edge LED lighting solution designed for a diverse range of commercial and industrial applications. This robust fixture is widely recognized for its energy efficiency, durability, and optimal performance, making it an ideal choice for environments that demand high-quality illumination.

One of the standout features of the LX-1500 is its innovative LED technology, which provides significant energy savings compared to traditional lighting options. The fixture is engineered to produce high lumen output while consuming minimal wattage, leading to reduced energy costs and a lower environmental impact. The LX-1500’s long lifespan further enhances its efficiency, minimizing the need for frequent replacements and lowering overall maintenance expenses.

The design of the LX-1500 encompasses advanced thermal management technology. This ensures that the fixture can operate effectively in challenging environments, dissipating heat efficiently to maintain optimal performance over extended periods. This thermal management not only protects the LED components but also enhances the overall reliability of the fixture.

Another remarkable characteristic of the Hubbell LX-1500 is its versatility. It is available in a variety of configurations and mounting options, including pendant, surface, and wall-mounted setups. This adaptability allows users to tailor the installation based on specific needs, whether it be for a warehouse, manufacturing facility, or retail space.

The LX-1500 is also equipped with advanced optical technologies that enhance light distribution and reduce glare. Its precision-engineered lenses provide uniform illumination, ensuring that areas are lit adequately while promoting safety and productivity. Moreover, the fixture’s modern aesthetics make it a visually appealing addition to any space.

In summary, the Hubbell LX-1500 is an exceptional lighting solution that combines energy efficiency, durability, and adaptability. With its state-of-the-art LED technology, effective thermal management, and versatile design, the LX-1500 stands out as an ideal choice for organizations looking to enhance their lighting systems while reducing operational costs. Whether in industrial, commercial, or institutional settings, the LX-1500 delivers reliable performance and outstanding illumination.