Yamaha PSR-E303, YPT-300 owner manual Using the Midi Terminals, Turn on the power

Page 9

Setting Up

Make all necessary connections BEFORE turning the power on.

Connecting headphones (PHONES/OUTPUT Jack)

The PSR-E303/YPT-300 speakers are automatically shut off when a plug is inserted into this jack. The PHONES/OUTPUT jack also functions as an external output.

You can connect the PHONES/OUTPUT jack to a keyboard amplifier, stereo system, mixer, tape recorder, or other line-level audio device to send the instrument’s output signal to that device.

WARNING

•Avoid listening with the headphones at high volume for long periods of time; doing so may not only result in ear fatigue, it may be damaging to your hearing.

CAUTION

•To prevent damage to the speakers, set the volume of the external devices at the minimum setting and turn power off the devices before connecting them. Failure to observe these precautions may result in electric shock or equipment damage. Also, be sure to set the volumes of all devices at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level.

Connecting a footswitch (SUSTAIN Jack)

The sustain function lets you produce a natural sustain as you play by pressing an optional footswitch. Plug the Yamaha FC4 or FC5 footswitch into this jack and use it to switch sustain on and off.

NOTE

•Make sure that the footswitch plug is properly connected to the SUSTAIN jack before turning on the power.

•Do not press the footswitch while turning the power on. Doing this changes the recognized polarity of the footswitch, result- ing in reversed footswitch operation.

Using the MIDI Terminals

MIDI instrument

The instrument also features MIDI terminals, allow- ing you to interface the instrument with other MIDI instruments or computers. (For more information, see page 58.)

NOTE

•MIDI cables (sold separately) must be used for connecting to MIDI devices. They can be bought at music stores, etc.

Turn on the power

Turn down the volume by turning the [MASTER VOLUME] control to the left and press the [STANDBY/ON] switch to turn on the power. Press- ing the switch again turns the power off.

Backup data in the flash memory (page 29) is loaded to the instrument when the power is turned on. If no backup data exists on flash memory, all instrument settings are restored to the initial factory defaults when the power is turned on.

CAUTION

•When using a power adaptor, even when the power is off, a small amount of electricity is still being consumed by the instrument. When you are not using the instrument for a long time, make sure to unplug the AC power adaptor from the wall AC outlet, and/or remove the batteries from the instrument.

CAUTION

•Never attempt to turn the power off when a “Writing!” message is shown in the display. Doing so can damage the flash memory and result in a loss of data.

PSR-E303/YPT-300 Owner’s Manual

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Page Please Keep this Manual FCC Information U.S.A Precautions Saving and backing up your data Panel logos Supplied AccessoriesContents Power Requirements Setting UpUsing an AC Power Adaptor Using BatteriesUsing the Midi Terminals Turn on the powerMake all necessary connections Before turning the power on Front Panel Panel Controls and Terminals@1 @2 @3 @4@5 @6@7 Press the Voice button Try playing a variety of instrument VoicesSelect a Voice FlutePlaying Two Voices Simultaneously-Dual Press the Dual ON/OFF button to turn the Dual function onSelect a Dual Voice Select a Split Voice Press the Split ON/OFF button to turn the Split function onDrum kits Playing the Grand Piano VoicePress the Portable Grand button Press the Voice button Select the desired Drum kitDrum Kit List Try out each keyPress the Sound Effect KIT button Quick Guide Fun SoundsStart the metronome Set the metronome tempo by using the number buttons 0-9, +Press the TEMPO/TAP button to display the tempo TempoSet the metronome volume by using the number buttons 0-9, + Set the time signature by using the number buttons 0-9, +Press the Function button a number of times until MetroVol AppearsSelect and Listen to a Specific Song Select the desired Song by using the number buttons 0-9, +Press the Song button Press the START/STOP buttonSong List Other OperationsPress the Style button Selecting a rhythm of a StyleSelect a Style HH LightTurn Sync Start on Playing with a StyleSplit Point Auto Accompani Ment range Start recording Recording Your PerformanceStop recording Recording to a specified trackSpecify the track you want to record UserRecording to Track Deleting User Songs Press and hold the REC button for longer than a secondPress the +/YES button Backup Backup and InitializationBackup Clear InitializationBasic Operation Basic Operation and DisplaysPress a button to select a basic function BritePno003 Lesson 1 Listen & Learn Song LessonYamaha Education Suite Select the desired Song for your lessonNo LPart Stop the Lesson modeSelect the part you want to practice Start LessonGrade Lesson 2 TimingR3 Waiting Lesson 3 WaitingSong settings Song VolumeChanging the Melody Voice Set the Song Volume by pressing the number buttons 0- 9, + MuteSongVol Practice Makes Perfect RepeatOFF Repeat Play With a Variety of Effects Adding HarmonyTrio To add Reverb Adding ReverbSelect a Reverb Type Hall2Adding Panel Sustain Adding ChorusChorus1 OFF SustainSetting the Touch Sensitivity Handy Performance FeaturesTouch Response Sensitivity Touch ResponseSetting the Split Point TransposeTranspos One Touch Setting TuningTuning SprnoSaxChanging the tempo of the Song/Style Adjusting the Voice ParametersStyle Auto Accompaniment Functions Various ways to start and stop Style playbackStarting Style playback Stopping Style playback Stop and Enter Sync Start ModeImmediate Stop Play the Ending and StopTurn Sync Start on Pattern Variation SectionsPress the INTRO/ENDING/rit. button Press the MAIN/AUTO Fill buttonAdjusting the Style Volume Set the Style volume by using the number buttons 0-9, +StyleVol Easy Chords Playing Auto Accompaniment ChordsStandard Chords Easy Chords Standard ChordsChord Name/Abbreviation Normal Voicing Chord C Display Recognized Standard Chords ChartDict Looking up Chords Using the Chord DictionaryChord names About chordsSet the value by using the number but- tons 0-9, + Function SettingsFunction Setting List Select the item and change the valueVolume What is MIDI? About MidiWhat You Can Do With Midi Midi settings Local SettingsPC Mode External Clock SettingsOFF PC mode Chart of PC SettingsRemote Control of Midi Devices PSR-E303/YPT-300 Panel Setting Transmission Initial SendRemote control keys Connecting a personal computer Installing Musicsoft DownloaderTransferring data from a computer Using Transferred Songs for LessonsProblem Possible Cause and Solution TroubleshootingMaximum Polyphony Voice ListVoice List Chromatic Ensemble Synth Effects Sound Effects Midi Drum Kit ListDrum Kit List Maou Style Style Name Beat Style ListHarmony Types Effect Type ListYamaha Midi Implementation ChartOmni Poly Effect map Midi Data FormatPanel Controls SpecificationsPanel Controls and Terminals IndexIndex Limited Warranty North America WD56610

PSR-E303, YPT-300 specifications

The Yamaha YPT-300 and PSR-E303 are two notable models in Yamaha's extensive lineup of portable keyboards, designed to provide users with a versatile instrument suitable for both beginners and more experienced musicians. These keyboards incorporate a variety of features and technologies that make them appealing to a wide audience.

One of the standout features of both models is the comprehensive range of 61 semi-weighted keys, which offer a responsive touch and allow for expressive performances. The keyboards come equipped with a variety of voices, boasting over 500 instrument sounds. This diverse array includes everything from traditional piano and strings to modern synths and percussion, providing users with plenty of options to explore different musical styles.

Accompanying the extensive sound palette is a broad selection of accompaniment styles, with over 200 preset styles that allow users to play along with a full band sound. This feature is particularly beneficial for practice sessions, composing, or simply enjoying music in a more engaging way. The Smart Chord function further enhances the playing experience by allowing users to play complex chords with a simple finger placement, making it easier for beginners to create rich harmonic sounds.

In terms of educational features, both the YPT-300 and PSR-E303 include a built-in lesson function. This function helps users learn to play popular songs with ease through visual aids and simplified note guidance. The Performance Assistant technology is another innovative element, which prevents mistakes during play by ensuring that only musically relevant notes are sounded, a great tool for building confidence.

For connectivity, both models are equipped with a headphone jack for private practice, as well as MIDI connectivity that allows for integration with music production software and other digital instruments. The USB-to-host port is also a significant feature, enabling users to connect the keyboards to a computer or tablet, opening up a wide range of possibilities for music creation and recording.

Overall, the Yamaha YPT-300 and PSR-E303 are packed with features designed to inspire and assist musicians of all levels. With their user-friendly interface, extensive sound libraries, and versatile functionalities, these keyboards serve as a perfect gateway for anyone looking to explore the world of music.
Top Page Image Contents