FEATURES
Programming track numbers
You can select up to 99 tracks and store them in memory in a desired sequence. Any track can be stored more than once.
1While playback is stopped, select a track with ° or ¤.
2Press PROGRAM to store the track.
y PROGRAM lights up; the track number programmed and P with the total number of stored tracks are displayed.
3Select and store all desired tracks in this way.
4Press 2; to start playback of your selected tracks. y PROGRAM is shown and playback starts.
•You can review the program by pressing PROGRAM for more than 2 seconds.
y The display shows all stored tracks in sequence.
SET·
CLOCK
PROGRAM
RADIO·BAND
English
Notes: – If you press PROGRAM and there is no track selected, SELECt is displayed.
– If you try to store more than 99 tracks, FULL is displayed.
Clearing the program
1If necessary, press 9 to stop playback.
2Press 9 to clear the program.
y CLEAr is displayed once, PROGRAM goes off and the program is cleared.
Notes: The program will also be cleared if you
–interrupt the power supply or
–open the CD lid.
15