UsethefacepanellocatedrotaryCUEVOLUMECONTROL (13)toadjusttheCUEvolumewithoutchangingtheoveralmix. ByturningthefacepanellocatedCUE1/2ROTARYCONTROL (14)counterclockwiseyou wilbeabletochoosethechannel youwishtomonitor.
5.CROSSFADERSECTION:TheCROSSFADER(16)alows youtomixfromonesourcetoanother.TheCROSSFADER(16) inyourunitisremovableandiftheneedarisescanbeeasily
REPLACEABLE CROSS FADER
1.UNSCREW THE OUTSIDE FACE PLATE SCREWS ON THE LOWER H ALF OF THE MIXER. REMOVE THE FADER CAPS AND FACE PLATE.
2.UNSCREW THE FADER (B)
SCREWS. DO NOT TOU CH INSIDE SCREWS ( C). CAREFU LLY REMOVE OLD CROSS FADER AND UNPLUG CABLE (D).
3.P LUG IN THE NEW CROSS FADER INTO CABLE (D) A ND PLACE BACK INTO MIXER.
4.SCREW THE CROSS FADER TO MIXER WITH T HE FA DER PLATE SCREWS (B).
5.RE PLACE THE LOWE R HALF FACE PLATE AND SCREW TO THE MIXER.
NOTE:DONOTAPPLYPRESSUREWHILEUSINGTHECROSSFADER(16). LIGHTLYGLIDETHECROSSFADERBACKANDFORTH.PRESSINGDOWN ON THECONTROLSCANBENDCONTACTSANDCAUSE ALOSS OF SOUND.
6.OUTPUTSELECTIONCONTROL:Onceyouarecomfort- ablewiththesoundlevelofyourmusicyoumayadjustthevol- umewiththeMASTER(11)rotarycontrol.
7.MICSECTION:PlugyourmainMICintotheMIC1/4"input
(3)locatedontherearpanel.
8.”IpodFriendly”cable:ToconnectyourIpodorotherDigital MediaPlayer,usetheincludedIpodcable.Connectthe1/8’end ofthecabletotheheadphoneorlineoutjackofyourplayer,and connecttheRCAendtothelineinput(7)ofyourmixer.
SPECIFICATIONS: | |
| |
INPUTS: | 3 mV, 47 KOhm |
Phono | |
Line | 150 mV, 27 KOhm |
MIC…………..........……….................1.5 mV, 1 KOhm Balanced | |
OUTPUTS: | 20V Pea |
Max | |
GENERAL: | 20Hz - 20KHz +/- 2 dB |
Frequency Response | |
Distortion | < 0.02% |
S/N Ratio | Better Than 80 dB |
Headphone Impedance | 16 Ohm |
Power So urce | .AC 1 5V 5 00mA |
Dimensiones | 6.5" x 3.3" x 10" |
…………………………………………….....(165 x 84 x 254 mm) | |
Weight | 3.3 lbs (1.5kg) |
SPECIFICATIONS SUB JECT TO C HANGE WITHOUT NOTIFICATION FOR IMPROVEMENT.