Recommended Set-up Procedure
Ideally volume on the unit should be set at maximum before the microphone volume is adjusted to the desired level. Turn on the main power switch and use either a wireless microphone or cabled microphone to adjust the volume.
Operating The Sound System
•Place the PresentationPro at its desired location.
•CAUTION: Assure the 120/240 switch is in the correct position.
•Plug the power cord into a grounded 120 volt, 60 Hz outlet.
•Connect and audio source. Plug a microphone into either the XLR MIC input jack or the ¼” phone mic input or a wireless Califone microphone. An audio source can be plugged into the AUX or LINE IN jacks.
•Turn the power switch “ON” (the red LED on the rear panel should light).
•Adjust volume (press the Vol+/Vol- on the rear panel or keys on
•Point the remote control at the speaker grill).
continued on page 3
Vi s i t u s o n l i n e a t califone . com
2