EAW DX8 instruction manual Record Out, IEC AC Socket

RECORD Out

These RCA connectors supply unbalanced line-level signals from the BUS A and BUS B outputs. Use these outputs to connect to the inputs of a recorder, or as additional line-level outputs to connect to an external power amplifier. The signals are the same as the main outputs.

OUTPUTS A/B

These 3-pin Phoenix-type connectors supply a balanced line-level signal from BUS A and BUS B.

LOGIC I/O

This 25-pin D-Sub connector provides 10 logic control inputs and 10 logic control outputs (open- collector). These inputs can be used to control a wide variety of DX8 functions via external switching. The outputs can be used to provide logic for external indicators for a number of internal settings and conditions. The function of each logic input and output can be programmed via software to suit individual applications. See page 13 for the Logic I/O pinouts.

REMOTE BUS

This 3-pin Phoenix-type connector can be used to attach optional remote controls to the DX8. Several remote controls can be connected to each other in a daisy-chain fashion to extend the remote control functionality of the DX8.

COMM PORT

This is identical to the COMM PORT on the front panel. Use this to connect to an RS-232 serial port on a personal computer or third-party controller (i.e., show controller) for external control of the DX8.

EXPANSION SLOT

The optional DX10e card can be installed here. It provides eight additional independent balanced output mixes.

24 VDC POWER

The DX8 can be powered using a 24 VDC power supply. This can serve as the primary power supply for the DX8, or as a backup supply in case of an AC power failure. The DX8 seamlessly switches to the backup supply if there’s a power loss. When both AC power and 24V DC power are connected, the AC power is used and no current is drawn from the DC supply.

IEC AC Socket

Connect the supplied AC linecord to the IEC AC socket.

1 2 3 4 5 6 7 8

DIRECT OUTPUTS

U	U
-20 +20	-20 +20
TRIM	TRIM
BUS A	BUS B

POWER	–	MIC
		+	G
INPUT		LINE
22-28V DC,			–
3A MAX	G	+

100 –240V	, 50/60Hz, 1A MAX	–
		+
	LISTED COMMERCIAL
R	AUDIO EQUIPMENT	LINE	LINE
	9Z39

DX8 DIGITAL MIXER

	U			U			U
IC	G		IC	G		IC	G
	AI			AI			AI
M	N		M	N		M	N
0	60	0		60	0		60
-30dB +30dB			-30dB +30dB			-30dB +30dB
TRIM			TRIM			TRIM
1				2			3
MIC			MIC			MIC

LINE LINE LINE

	U		U
IC	G	IC	G
	AI		AI
M	N	M	N
0	60	0	60
-30dB +30dB		-30dB +30dB

TRIM TRIM

45

MIC MIC

LINE LINE

SERIAL NUMBER

	U
IC	G
	AI
M	N

060

-30dB +30dB

TRIM

6

MIC

LINE

MANUFACTURING DATE

	U		U
IC	G	IC	G
	AI		AI
M	N	M	N
0	60	0	60
-30dB +30dB		-30dB +30dB
TRIM		TRIM

78

MIC MIC

LINE LINE

12	INPUTS	1	+5V	G	+	–
G 11	OUTPUTS	1

LOGIC I/O REMOTE BUS COMM PORT

PHANTOM POWER

OUTPUTS

–

–

48V DC

A

B

G

+

G

+

ON

A

B

1

2

3

4

5

6

7

8

RECORD

SIGNAL-FLOW DIAGRAM

Channel

Meter

Analog

Input

CH 1

CH 1

Direct

Output

			ALC	AUTO
				(Automix)				5-Band
							31-Band
					Bus A	ALC		Parametric
							Graphic EQ
Analog-to-					Channel			EQ
	3-Band
Digital		Mute			Faders to
	EQ
Converter					A & B			5-Band
							31-Band
					Bus B	ALC		Parametric
							Graphic EQ
								EQ
				AUTO	Channels
			ALC
				(Automix)	2-8
	Lo-Shelf	Hi-Shelf		Mute	Compressor
	EQ	EQ
				Master			Digital-to-
								A & B
				Faders			Analog	Outputs
				A & B			Converter

Lo-Shelf	Hi-Shelf	Mute	Compressor
EQ	EQ
			Bus B
				Record
			Inputs
				Outputs
			Bus A

DX8 Signal-Flow Diagram	Output
	Meters

6– DX8