20.Step Up/Cross Setup Button: This has two functions:
1. In manual chase or program modes, this button is used to select the next step, (scene) in the pattern. The current step will be displayed by the right two digits in the LCD display (6). Holding down this button will quickly advance through the steps (scenes). Tapping this button will increase the pattern by one.
2. When used with the SHIFT BUTTON (16) this button is used to activate or disengage the CROSS FUNCTION.
21.Step Down/Blind Button:This has two functions:
1. In manual chase or program modes this button is used to select the previous step (scene) in the pattern. The current step will be displayed by the right two digits in the LCD display (6). Holding down this button will quickly scroll backward through the selected chase steps (scenes). Tapping this button will decrease the pattern by one.
2. When used with the SHIFT BUTTON (16) during CHASE MODE, this button will engage or disengage the BLIND FUNCTION.
22.Loop/Loop Exit Button: This button serves two functions:
1. This button is used to activate and set chase programs into
LOOP MODE.
2. Used with the SHIFT BUTTON (16), this operation will disengage and clear LOOP MODE.
23.Program/End Step Button: This button has three functions:
1. This button is used to engage PROGRAM MODE.
2. When in PROGRAM MODE, this button is used to load a scene into a chase pattern.
3. When used with the SHIFT BUTTON (16), this button is used to finalize a program.
24.Chase/Audio Button: This button has two (2) functions:
1. This button is used to enter CHASE MODE.
2. Used with the SHIFT BUTTON (16), this button will activate
AUDIO MODE.
25.Assign/Delete Program Button: This button serves two functions: 1. This button activates the ASSIGN function. This functions allows you to ASSIGN a group of channels to a single FLASH BUTTON
(1 & 13).
2. In PROGRAM MODE, this button, when used with the SHIFT
BUTTON (16), is used to delete a program (CHASE) pattern.
26.Tap Sync/Manual Step Button: This button has two functions:
1. In CHASE MODE, this button is used to set a momentary speed. Channels
2. When used with the SHIFT BUTTON (16), this button is used to activate the MANUAL STEP MODE. This mode allows you to manually select chases and control steps for channels
27.Patch/Midi Channel Button: This button is used to activate the PATCH FUNCTION or to set the MIDI channel:
1. To activate the PATCH function, hold down this button for two seconds. The red PATCH LED will glow indicating PATCH is ready to be set or changed.
2. To activate the MIDI channel adjustment settings, press and hold down the PATCH/MIDI CHANNEL BUTTON for two seconds while holding down the SHIFT BUTTON (16).
28.Stand By/Manual Button: This button is used to select Stand By and Manual functions:
1. When the unit is powered on, it will always default to Stand By mode (no output). Pressing this button will take you in and out of Stand By mode.
2. Hold down the SHIFT BUTTON (16) while pressing this button to enter MANUAL OPERATION MODE.
29.Full On Button: Pressing this button will bring FADER CHANNELS
Function and Controls - Rear Panel
3 0 | 3 1 | 3 2 | 3 3 | 3 4 | 3 5 | 3 6 | 3 7 | |
|
|
|
|
|
|
| LINE INPUT |
|
DC INPUT |
|
|
|
|
|
| 100 |
|
|
|
|
|
|
|
|
| |
DC |
| Polarity Select |
|
|
|
|
| |
250mA min. |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
- + |
|
|
|
|
|
|
|
|
| POWER | DMX OUT | MIDI THRU | MIDI IN |
| FOOT CONTROL | ||
|
| |||||||
|
|
|
|
|
|
| ||
30.Power Input: Connect the included external power supply to this connection. Be sure to only a recommened power supply DC 12v- 20v, 250mA min.
31.Power Switch: This switch connects and disconnects main power.
32.DMX Polarity Switch: This switch changes the DMX line polarity to
©American DJ Suply® | ©American DJ Suply® |