American DJ user service Rear Panel, Color 150/RG Controls and Functions

Page 3

Color 150/RG™

Controls and Functions

 

 

REAR PANEL

1

2

3

4

5

6

7

8

9

10

Color 150/RG™

Controls and Functions

 

 

1. Dip Switches - These switches serve two functions. In master

slave mode these switches are used to assign a specific head

address. In DMX mode these switches are used to assign a DMX

address to the unit. In DMX mode each switch corresponds to a

specific value based on binary code. See page 7 for a detailed

explanation of DMX binary code.

2. Microphone - This microphone receives external low frequencies to

trigger the unit in Sound-Active and Master/Slave mode.

3. Audio Sensitivity Knob - This adjust audio sensitivity of the inter-

nal microphone (5). Turning the sensitivity knob in the clockwise

direction will increase the sensitivity to sound. Turning the knob in

the counter clockwise direction will decrease the fixture’s sensitivity

to sound.

4. Gobo Replacement Thumb Screw - See page 14 for Gobo replace-

ment.

5. Power Indicator - This LED will flash when it receives either an

audio or DMX signal.

6. MINI/C Controller Jack - This jack is for use with the optional

MINI/C Blackout controller only. Do not attempt to connect an audio

BOTTOM PANEL

11 12 13 14 15

signal this jack, this will damage the PC board and void your manufac-

tures warranty!

7. XLR Output Jack - This jack is used to transmit the incoming

DMX signal to another DMX fixture, or transmit a Master/Slave signal

to the nest Color 150/RG™ in the chain. For best results in DMX or Master/Slave mode terminate this jack if it is the last unit in the chain. See “Terminator” on page 7.

8.Power Cord - Connect only to a matching power outlet. Never use this fixture is the ground prong has been removed or broken off.

9.Fuse Holder - This housing stores the 3 amp GMA protective fuse. Always replace with the exact same type fuse, unless other wise instructed, by an authorized American DJ® service technician.

10.XLR Input Jack - This jack is used to accept an incoming DMX signal or Master/Slave signal.

©American DJ Supply® - www.americandj.com - Color 150/RG™ Instruction Manual Page 5

©American DJ Supply® - www.americandj.com - Color 150/RG™ Instruction Manual Page 6

Image 3
Contents Color 150/RG General Information American DJColor 150/RG Product Registration Color 150/RG Safety PrecautionsColor 150/RG Features Color 150/RG General InstructionsColor 150/RG Controls and Functions Rear PanelColor 150/RG Operation Master/Slave LinkingDMX Linking Color 150/RG Set UpPin XLR to 5-Pin XLR Conversion Color 150/RG Fuse & Lamp Replacement Gobo ReplacementColor 150/RG Halogen Lamp Warning Color 150/RG Master/Slave Settings Fixture CleaningColor 150/RG Cleaning Color 150/RG Trouble ShootingDip Switch Position Color 150/RG DMX Dip Switch ChartYear Limited Warranty Color 150/RG Warranty

150/RG specifications

The American DJ 150/RG is a powerful and versatile lighting fixture that has become a staple for DJs, event planners, and venues seeking to elevate their lighting setup. This dynamic light offers an array of features and technologies designed to enhance performances and create unforgettable atmospheres.

One of the standout features of the American DJ 150/RG is its RGB color mixing capability. Utilizing a combination of red, green, and blue LEDs, the fixture can produce a wide spectrum of colors, allowing users to create vibrant and engaging lighting displays. This feature is particularly beneficial for creating mood lighting or for synchronizing colors with music during performances.

The 150/RG is equipped with advanced control options. It supports DMX512 protocol, allowing for precise control over multiple fixtures in a setup. This flexibility enables lighting designers to craft elaborate light shows that can match the rhythm and energy of the music being played. Users also have the option to operate the light in stand-alone mode, making it an excellent choice for smaller events where a full lighting rig may not be necessary.

In terms of construction, the American DJ 150/RG is designed with durability in mind. The fixture boasts a robust housing that can withstand the rigors of transportation and frequent use. Its compact size makes it easy to transport and set up, while still delivering professional-grade performance.

Another key characteristic of the 150/RG is its energy efficiency. With the use of LED technology, this fixture consumes significantly less power compared to traditional lighting sources. This feature not only saves on energy costs but also reduces the need for complex ventilation systems, as LEDs produce less heat.

The American DJ 150/RG also includes user-friendly controls. The fixture is equipped with an intuitive interface that allows for easy adjustments of colors, patterns, and effects. This user-centric design ensures that both novice and experienced users can quickly familiarize themselves with the light and make adjustments during their performances.

In summary, the American DJ 150/RG is an exceptional lighting fixture that combines versatility, durability, and energy efficiency. With its rich color mixing capabilities, advanced control options, and robust construction, it caters to the needs of DJs, event planners, and venues looking to create captivating and visually stunning experiences. Whether for a club, wedding, or live performance, the 150/RG stands out as a reliable choice for quality lighting solutions.