Inputs and Outputs (Cont.)
(35)AC CONNECTION - AC power cord.
(36)FUSE - Fuseholder. Only replace the fuse when the device is disconnected from mains. Only replace by fuses of the same power and rating.
(37)AC VOLTAGE SELECTOR - Make sure that the selector is properly set.
Replacing the Crossfader
Instructions for replacing the crossfader:
•Disconnect from main power supply.
•Remove the fader knob.
•Remove the two outer screws.
•Take the fader out and unplug the connection cable.
•Connect the new fader and replace back into mixer.
Technical Specifications - model XDM-352
Inputs: |
|
Microphone | 1.5mV, 600 Ohm |
Phono | 1.2mV, 47kOhm |
Line | 80mV, 27kOhm |
Output | 20V, peak to peak |
Frequency range | |
Distortion | <0.03% |
| >80dB |
Talkover | |
Tone control | Treble: 10Khz ± 12dB |
| Bass: 100 Hz ± 12dB |
| ± 12dB at 60Hz, 150Hz |
| 400Hz, 1KHz, 2.4KHz, |
| 8KHz, and 16KHz |
Headphone impedance | 16 Ohms |
Power supply | AC115/230V, 50/60Hz |
Dimensions | 19” W x 9.5” D x 3.25” H |
| 482 x 242 x 108 mm |
Weight | 12 lbs. / 4.5 kg |
|
|
© American DJ® AUDIO Los Angeles, CA 90058 USA
Specifications subject to change without notice.