American DJ instruction manual Operating Modes, Focusing, Super Jewel Operation

Page 4

Super Jewel™

Operation

 

 

Power Supply: Before plugging your unit in, be sure the source voltage in your area matches the required voltage for your American DJ® Super Jewel™ before attempting operation.

General Operation: Just plug this light in, and watch it go. This fixture is designed to operate as a stand alone unit. It has been tested and the lamp has been installed at the factory there is no assembly necessary. The Super Jewel™ is ready to be plugged in right out of the box. There is no power switch, after plugging the unit the select a desired operating mode. To enhance the beam output use this fixture with a fog machine to create 3-dimensional vibrant beams of light

Operating Modes:

This unit comes with a 3-way multi-operating switch located on the rear of the unit. The switch controls three (3) different operating modes; Static, Sound Active, and Continuous Rotation.

Switch in the "I" position: Mode 1 - In this mode the internal dichroic colored mirror dish will spin continuously in one direction, regardless of the presence of sound.

Switch in the “0” position: Mode 2 - In this mode the internal dichroic colored mirror dish will remain static. In this mode the unit may be used in multiple on a chaser.

Switch in the “II” position: Mode 3 - In the this mode the internal dichroic colored mirror dish will react to sound. Please note that tapping on the unit, or high pitched sounds may not trigger the unit, the unit is designed to react to low frequencies (bass). Also note that the music sensitivity is preset at the factory and may not be changed or adjusted.

Focusing:

The unit has a fully focusing lens. To focus the lens; locate the lens retaining thumb screw on the bottom of the unit. Loosen the lens thumb screw and use the screw to slide the lens back and forth to achieve the best possible focus. When the unit has been properly focused tighten the thumb screw.

Super Jewel™

Fuse & Lamp Replacement

 

 

Caution: Always replace with the exact same type lamp and fuse, unless otherwise specified by an authorized American DJ® technician. Replace with anything other than the specified part can damage your unit and will void your manufactures warranty.

Warning: If after you have replaced the lamp or fuse and you continue to blow either one, STOP using the unit. Contact customer support for further instructions, you may have to return the unit for servicing. Continuing to use the unit may cause serious damage.

Fuse Replacement: Disconnect the unit’s main power supply. Insert a standard flat head screw driver in to the fuse holder housing (located on the rear of the unit). Turn the screwdriver in a counter-clockwise direction to remove the fuse holder. Remove the old fuse and discard it, replace the fuse with the same type. Insert the fuse holder back into it’s housing and turn in clockwise direction to lock the holder in place.

Lamp Replacement: Caution! Never open the unit when in use. Always disconnect the main power and allow the fixture ample time to cool before attempting to replace the lamp. Lamp replacement has been made simple by incorporating a split dome that is retained by thumb screws. Again, please remember to always replace with the exact same type lamp.

1.Be sure to follow the proper procedures when handling halogen lamps. Never touch the new lamp with your bare fingers.

2.Loosen the two thumb screws (6 located on the sides of the unit.

3.Once the thumb screws have been loosened, pull back the lamp assembly cover plate (6) to expose the lamp (11).

4.Remove and replace the lamp with an exact match.

5.Reassemble in reverse order.

Thumb screw

Lamp Assembly

Lamp Cover

Thumb screw

©American DJ® - www.americandj.com - Super Jewel™ Instruction Manual Page 7

©American DJ® - www.americandj.com - Super Jewel™ Instruction Manual Page 8

Page 3 Page 5
Image 4
Page 3 Page 5
Contents American DJ Super Jewel General IntroductionSuper Jewel Features Super Jewel Warranty RegistrationSuper Jewel Precautions Super Jewel General InstructionsSuper Jewel Control & Functions Focusing Super Jewel Fuse & Lamp ReplacementOperating Modes Super Jewel OperationFixture Cleaning Super Jewel CleaningSuper Jewel Trouble Shooting Super Jewel WarrantyTechnical Specifications Super JewelSpecifications

Super Jewel specifications

The American DJ Super Jewel stands out as a premier DJ lighting fixture, designed to deliver exceptional performance and versatility for both amateur and professional DJs. With its stunning illumination capabilities and robust features, it has gained popularity in various settings such as nightclubs, live performances, and events.

One of the main highlights of the Super Jewel is its powerful LED technology. Equipped with a collection of high-output tri-color LEDs, the fixture provides vibrant washes of color without the need for traditional bulbs, which can be less long-lasting and more energy-consuming. The tri-color LEDs ensure that color mixing is smooth and uniform, allowing DJs to create dynamic lighting effects that enhance the overall atmosphere of any performance.

The Super Jewel features multiple operational modes, including sound-activated and auto modes, making it adaptable to various settings and requirements. In sound-activated mode, the fixture responds to ambient sound, synchronizing its light patterns with the beat of the music, which can easily captivate the audience. In contrast, the auto mode allows for pre-programmed light shows that maintain a rhythmic flow during performances without requiring hands-on control.

Versatility continues with the ease of setup and control. The Super Jewel can be operated via DMX control for more advanced applications, enabling the user to synchronize multiple fixtures and customize light shows according to their vision. Its compatibility with various DMX controllers also expands the creative range for DJs who want to produce intricate light displays.

Moreover, the Super Jewel is designed with durability in mind. Crafted from robust materials, the fixture is built to withstand the rigors of transport and frequent use. This reliability is essential for mobile DJs who need equipment that can keep pace with their on-the-go lifestyle.

In terms of portability, the Super Jewel is lightweight and compact, making it easy for DJs to transport to different venues. This aspect, combined with its impressive features, ensures that it remains a top choice for entertainers seeking to elevate their performances through innovative lighting.

Overall, the American DJ Super Jewel encapsulates cutting-edge lighting technology with user-friendly features, making it an invaluable asset for any DJ looking to enhance their shows and create unforgettable experiences for their audiences.
Top Page Image Contents