Trance Wheel Control & Functions

Trance Wheel™

Control & Functions

Trance Wheel™

Control & Functions

1.Mirror - This is a highly reflective surface mirror specifically designed to optimize and enhance beam output. Never use glass cleaner that contains ammonia to clean the surface of the mirror (such as Windex).

2.Lens - This is a fully focusing high quality lens. Focus the lens by manually turning the lens in a clockwise or counter-clockwise direc- tion.

3.Filter - This unit comes with a built-in glass filter. This filter may be removed at any time for a completely different effect. To remove the filter unscrew the retaining thumb screw and gently pull the filter out.

4.Lamp Assembly - This assembly holds a ZB-EFR 15v/150w lamp.

5.Lamp Assembly Retaining Screws - These two screw hold the lamp assembly in place.

6.Lamp Assembly Cover - This plate accesses the lamp socket assembly. This cover is held securely in place by a single thumb screw

(7).

7.Lamp Cover Retaining Screw - This thumb screw holds the lamp socket assembly cover (6) into place

8.Function Switch - This is a 3-way function switch. This unit can be operated in three different mode all of which are controlled by this switch.

9.Microphone - This microphone receives external low frequencies to trigger the unit in Sound-Active and Master/Slave mode.

10.Fan - Cooling fan. For optimal performance keep this fan grill clean at all times.

11.Fuse Holder - This housing stores the protective 3 amp fuse. Always replace with the same exact fuse.

12.Power Cord - Connect only to a matching power outlet. Never use this fixture is the ground prong has been removed or broken off.