Controls

7 BPM -/+ Buttons

4 FX & Filter Knob

1 On/Off &

Volume Control

2 Record Button

3 Record Input

Select Switch

5 Hold Button

6 Reset

9 Loops

10 Link

11 Recording A&B

12 Recording Play

13 Recording Loop

8	Distortion	15	Play Song	14	Record Song
	Rocker		Button		Button

1.On/Off & Volume Control: Turns mixer on or off and adjusts the master volume.

2.Record Button: Press the Record button to start/ stop recording and save to the mixer.

3.Record Input Select Switch: Selects MP3 or Microphone to record from. DJ HINT: Ensure the switch is in the correct position before recording otherwise you may record from the wrong source. You can only record one at a time.

4.FX & Filter Knob: Select from 8 different effects (FX) and filters to distort and manipulate your music.

5.Hold Button: To maintain the effect of the Distortion Rocker.

6.Reset: Resets the memory.

7.BPM -/+ Buttons: Press – to decrease the tempo or + to increase the speed of the music. Tap

the to quickly set the speed. DJ HINT: Tap with the beat of a song from your MP3 player to sync the speeds. Press and hold to return to default BPM.

8.Distortion Rocker: Press and move to manipulate the FX and/or filter to distort any “Linked”

loops. DJ HINT: Use the “HOLD” button to keep the distortion on even if you stop pressing the Rocker.

9.Loops: Play and mute the different loops: Back Beats, Riffs, Licks, & Runs.

10.Link: Link Loops and recordings to the Distortion Rocker.

11.Recording A & B: Switch between recording A & B. DJ HINT: When the light is OFF recording A will play. If the light is ON recording B will play. You can switch between A & B anytime.

12.Recording Play: Plays recording one time. DJ HINT: Press repeatedly to start recording again.

13.Recording Loop: Plays & mutes recording as a Loop.

14.Record Song Button: Press to record your composition up to 2.5min. DJ NOTE: You can only record content currently stored in the mixer.

15.Play Song Button: Press to play back your recorded song.