Transport Controls

Axiom AIR's transport controls allow you to perform the following operations in your Logic Pro project:

•Play: Press Play to start playback.

•Stop: Press Stop to stop recording or playback.

•Record: Press Record to start recording on all record-enabled tracks.

•Rewind: Tap Rewind once to move the playhead one bar to the left. Press and hold Rewind to move the audio pointer's current position backward. Release the button to stop it.

•Fast Forward: Tap Fast Forward once to move the playhead one bar to the right. Press and hold Fast Forward to move the audio pointer's current position forward. Release the button to stop it.

•Jump to Project Start: Hold the Loop button down and press Rewind to jump to the Project Start position.

•Jump to Project End: Hold the Loop button down and press Fast Forward to jump to the Project End position.

•Undo: Hold the Loop button down and press Stop to undo or cancel the last operation in Logic Pro (the same as selecting Undo from the Edit menu).

•Cycle-Play:Press and hold the Loop button and then press Play to activate or deactivate Cycle Play Mode (playback will loop in the "cycle area" as set by the left locator and right locator positions in Logic Pro's transport).

•Cycle-Record:Press and hold the Loop button and then press Record to activate or deactivate Cycle Record Mode (recording will loop in the "cycle area" as set by the left locator and right locator positions in Logic Pro's transport).