M-Audio 88 manual Zone Transpose

Page 23

22 User Guide

Oxygen 88

Zone Transpose

The Zone Transpose function (ZONE TRAN) allows the pitch of a Zone to be shifted up or down in one semi-tone (half- step) increments, to a maximum of 12 semi-tones.

1.Select a Zone by pressing its Zone button.

2.Press the Advanced button.

3.Press the Zone TRAN key - the LED screen will display the current Transpose value.

4.Repeatedly press the "-" or "+" button to lower or raise the pitch.

5.Press the Enter key.

6.Repeat steps 1 - 5 to set the Transpose value for the remaining Zones.

After setting the Transpose value and exiting Advanced mode, activate all desired Zones by simultaneously pressing their respective Zone buttons.

Note: Zone Transpose shift settings work in combination with the Global Transpose shift setting. This can be useful when working with different Transpose or Octave shift settings across multiple Zones. The Global Transpose function shifts the entire keyboard up or down, while preserving relative pitch settings between Zones. For example, if a Zone is configured for a Transpose shift of +5, and a Global Transpose shift setting of +2 is applied to the keyboard, the effective octave shift for that Zone is +7.

Image 23

Contents Oxygen 88 User Guide Introduction Oxygen 88 FeaturesWindows Installation Instructions Minimum System Requirements SetupHost Software Configuration Mac OS X Installation InstructionsDirectLink DAW Support InstallationDAW Configuration Pitch Bend Wheel Controls and ConnectorsTop Panel Modulation WheelLED Screen Octave/Transpose ButtonsTrack Buttons Function Buttons Slider Buttons SlidersTransport Buttons Zone ButtonsVelocity-sensitive Keyboard 13. On/Off SwitchPower Socket KnobsUSB Port Expression Pedal InputMidi Out Port Control Select CancelAdvanced Keyboard Functions Channel Assign Control Assign, Data 1, Data 2, DataBank LSB Global ChannelProgram Velocity Curve Bank MSBPanic Memory Dump Drawbar ModeEnter Key Device IDStore Number KeysZone Voice Zone KeysZone MSB Zone ProgramZone LSB Zone Range Zone Midi Channel Zone ChannelZone Octave Zone Transpose Advanced Programming Functions Key Parameter Value Setting Trigger Values for the Buttons or the Sustain Pedal Assigning MMC Control to Buttons Number MMC CommandAssigning a Note to a Button 28 User Guide Oxygen Programming a Button to Increment/Decrement a Midi CC value Programming a Button to Increment/Decrement a Program Change Reversing the operation of Knobs or Sliders Limiting the Range of a Knob or Slider Oxygen User Guide  Non-Volatile Memory Restoring the Factory SettingsSysEx Messages and Device ID Program and Bank Changes Midi Messages DefinedRPN/NRPN 36 User Guide Oxygen Fine 66Fine Coarse88 SysEx 38 User Guide Oxygen Oxygen 88 suddenly stopped working TroubleshootingStandard Midi Control Numbers Midi CCs Midi DataSliders and Knobs Assignable Midi CCsButtons and Pedals Baritone Sax Useful Midi DataDirectLink Transport Control Assignments Midi Note NumbersHexadecimal Value Decimal Value Hexadecimal Conversion ChartChorus Types Roland GS & Yamaha XG Nrpn MessagesGeneral Midi Reverb and Chorus Types Reverb TypesDocumentation Feedback Technical InfoDisposal of Waste Equipment by Users in the European Union Technical Support USA Product Information