Care of Your Microphone
Here are a few tips for care of your Pulsar microphone:
<Never subject the Pulsar to physical shock.
<Always use a
<Always wipe the Pulsar exterior down with a soft dry cloth and return it to its case after each use to prevent damage from dust.
<In the event that your Pulsar needs more extensive cleaning, lightly dampen a soft cloth with water or mild household soap and clean the metal exterior, wiping it completely dry when finished. Never spray a cleaning agent on the microphone itself, as the moisture can damage the unit.
<Avoid subjecting the Pulsar to any kind of moisture. In vocal applications, use a windscreen to protect the diaphragm from breath condensation and saliva
<Never disassemble the Pulsar microphone. There are no
<Always use
<Avoid temperature extremes above 95°F and below 50°F. In order to avoid harmful moisture condensation on the diaphragm, allow the microphone to acclimate to room temperature before connection when moving the microphone between outdoor and indoor environments.
Specifications
<Type: small diaphragm condenser
<Polar Pattern: cardioid
<Frequency Response: 20Hz – 20kHz
<Sensitivity: 13.8 mV/Pa
<Max. SPL for 0.5% THD: 134dB
<Equivalent Noise Level: 17dB
<Output Impedance: 200 Ω
<Recommended Load Impedance: > 1,000 Ω
<Preamp Topology: Class A FET, transformerless
<Power Requirement: 48V phantom power
<Connector:
<Dimensions: 22mm (0.87”) dia,, 132 mm (5.20”) long
<Weight: 115 g (4.0 oz)
Warranty Terms and Registration
Warranty Terms
and limitations applying to your specific product.
Warranty Registration
Thank you for registering your new
4• Pulsar