Getting Connected

Using the UHF-18 as a stand-alone unit

The UHF-18 can be used with any device that has a 1/4” mic input

To connect the UHF-18:

1.Use a 1/4” patch cable to connect the UHF-18 mic out to the 1/4” mic input on you mixer or other device.

2.Connect the power adapter cable to the DC power input of the UHF-18 and plug the adapter into the power source . A surge protector is recommended.

��

	��
��	��
��

Use the power adapter only when using the UHF-18 as a stand alone unit as shown above. Connecting the power adapter when using the UHF-18 as a plug-in module may result in damage to the UHF-18.