Setting the Frequencies Automatically

Setting up the Microphones

The wireless mics can be set to a frequ ency automatically using the frequency scan function Automatic setup is easy, and is recommended for most area s If you live in a metropolitain area, it might be necessary to use the manual setup process.

AUTOMATIC SETUP

Setting up the microphones using the frequency scan function.

1.Prepare the System: Ensure the main power switch on the rear panel is turned ON. Ensure the module is turned ON. Ensure the desired microphone is turned ON.

Note: The automatic process happens quickly, so it’s a good idea to have the mic on and in hand during this process.

2.Select a Group: Press the MENU button on the module until “GR” is visible in the display window. Then press the up and down buttons to select a group.

After 5 seconds the unit will automatically scan for an available frequency, and then switch to mic program mode. Have the mic on and ready for the next step.

3.Program the Mic: While the IR icon appears on the screen, hold the microphone up to the module about 8 inches away so that the two IR windows are facing each other.

Hold the mic there until the RF bars appear in the display window

4.Test the Mic: Check the microphone by speaking into it. The AF bars in the display window should illuminate when you speak. Note: After turning on a microphone, there is a 5 second delay before audio transmission.

Turn off the microphone (not the module) to test for outside interference. If the RF indicator still has bars showing, interference may be occurring. If this happens, perform an auto-scan on a different group.

After each channel is successfully paired, leave both the microphone and module on. This will prevent the next module from thinking that frequency is available. (Be sure to set the mics behind the main unit so they don’t get re-programmed)

5.Repeat the process for each remaining mic and module. Once this process is complete, the microphones and modules will remain assigned to these frequencies until you change them.

Troubleshooting this process:

The module continues to scan a group: That group probably has too much interference. Switch the module off and on again and try scanning a different group.

The RF bars didn’t show up and the mic has no audio: The mic probably didn’t get programmed. Make sure nothing is blocking the IR windows, the microphone is switched on, and repeat the process.

There is still RF intereference after auto scanning several different groups: If you can’t seem to ﬁ nd an interference free frequency after scanning several groups, you might be in an area with heavy RF interference. You may need to use the manual frequency selection process. See page 15 for the manual process.

��GROUP ��

��

DOWN2

��

AUTO SCANNING

��

IR PROGRAM�� MODE

��

UHF-5900 specifications

The VocoPro UHF-5900 is an advanced wireless microphone system designed to provide exceptional sound quality and reliable performance for a variety of applications. Suitable for both professional performers and casual entertainers, this system combines cutting-edge technologies with user-friendly features, making it a top choice in the world of wireless audio.

One of the standout features of the UHF-5900 is its UHF (Ultra High Frequency) operation, which offers a broader frequency range and reduces the risk of interference from other electronic devices. This ensures crystal-clear audio transmission, even in crowded environments. The system operates on multiple frequency channels, allowing users to easily switch channels if one becomes congested, ensuring uninterrupted performance during live events or recordings.

The UHF-5900 comes equipped with two handheld microphones, ideal for duets, group performances, or karaoke events. Each microphone features a high-quality dynamic capsule, which provides rugged reliability and delivers clear, professional-grade sound. The microphones are designed to be easy to use, with an ergonomic grip that allows performers to maintain comfort while on stage.

Another key technological advancement in the UHF-5900 is its automatic frequency scanning feature. This enables the system to search for the clearest channel automatically, saving time during setup and minimizing sound disruptions. Users can also manually select frequencies if needed, offering flexibility for various environments.

The receiver of the UHF-5900 is not only compact and portable but also equipped with dual antenna diversity. This technology helps minimize dropouts and ensures stable audio transmission, even when the performers move around the stage or venue. The device features adjustable volume controls for each channel, allowing for precise volume adjustments to suit different settings and ensuring that audio levels remain balanced.

Additionally, the UHF-5900 includes audio outputs that are compatible with a wide range of audio equipment. With both XLR and 1/4-inch output options, users can easily connect the receiver to mixing consoles, amplifiers, or powered speakers. The sleek, rack-mountable design of the receiver allows for easy integration into existing audio setups and works well in both professional and home environments.

Overall, the VocoPro UHF-5900 is a reliable and versatile choice for anyone seeking a robust wireless microphone system. Its impressive features, advanced technologies, and focus on user convenience make it an excellent investment for enhancing any audio performance, whether on stage or at home.