B-CONTROL NANO BCN44
4.1 LEARN function
The easiest way to assign MIDI functions to individual control elements is to use the LEARN function in the EDIT mode. Here, the assignment is done “from the outside.” For example, MIDI data that you are sending from a MIDI sequencer to your
Using the LEARN function, in addition to receiving CC, NRPN and note commands, almost all types of MIDI data can be received, including short SysEx strings.
sKeep the EDIT/EXIT button pressed and actuate the desired control element (push encoder or button). The control element is shown in the display.
sRelease the EDIT/EXIT button and press the LEARN button 
. The
s Start the desired MIDI command on your sequencer or software synthesizer.
sAfter successful data transmission, “GOOd” is shown in the display; otherwise, “bAd” is shown in the display if false, defective or excessively long data was sent.
sTo leave or cancel the LEARN function, press the EDIT/EXIT button.
sStore your changes in a preset.
| 5. SPECIFICATIONS | |
CONTROL ELEMENTS |
|
|
Controls | 4 endless push encoders | |
Buttons | 4 buttons |
|
| 4 system buttons |
|
MIDI INTERFACE |
|
|
Type | ||
DISPLAY |
|
|
Type | ||
POWER SUPPLY |
|
|
Voltage | U.K./Australia | 240 V~, 50 Hz |
| Europe | 230 V~, 50 Hz |
| China | 220 V~, 50 Hz |
| U.S.A./Canada | 120 V~, 60 Hz |
| Japan | 100 V~, 50 - 60 Hz |
Mains connection | external power supply , 9 VAC/250 mA | |
Battery operation | 3 mignon batteries, type LR6 (AA) | |
DIMENSIONS/WEIGHT |
|
|
Dimensions |
|
|
(H x W x D) | approx. 9" x 2 3/4" x 7" | |
| (230 mm x 70 mm x 180 mm) | |
Weight | approx. 1 lbs. 4 oz. | |
| 0.6 kg (without external power supply) | |
BEHRINGER makes every effort to ensure the highest standards of quality. Necessary modifications are carried out without notice. Thus, the specifications and design of the device may differ from the information given in this manual.
5. SPECIFICATIONS | 13 |