Crown Audio 140MAx specifications Included Accessories, Dimensions, Cooling, Protection

Page 2

140MAx Pack

140MAx back panel

Active Indicator: LED illuminates when VOX duck- ing is active.

VOX Threshold: Trim pot adjusts how loud the voice must be before ducking occurs. Can be set for no ducking.

Priority Release Control: Trim pot adjusts release

time of VOX ducking.

Mic/Line Input Connector: 3-pinPhoenix-type, balanced.

Mic Input Connector: XLR-type, balanced.

Phantom Power Switch: Turns phantom power on or off for Phoenix-type input connector and XLR input connector.

Mic/line Switch: Selects mic-level or line-level signal for Phoenix-type input.

Dual RCA Input Connector: For stereo music signals, unbalanced, summed together, two con- nectors per input.

TEL Input Connector: Transformer-isolated 600- ohm input, summed into input for paging from a telephone system.

XM Radio Antenna Connector: Connects to XM antenna cable.

RS-232 Port: Not currently active. For future diagnostics use.

Included Accessories

Phoenix-type connectors

Spade lugs

XM antenna

Remote control

Dimensions

Width (without rack ears): 17.3 in. (43.8 cm).

Height (front panel): 3.5 in. (8.9 cm).

Height (including feet): 4.1 in. (10.5 cm).

Depth (front panel to back panel): 12.2 in. (31.0 cm).

Depth (front of knobs to back of non-touch cover): 13.9 in. (35.2 cm).

Weight

Net Weight (140MAx): 20 lb (9.07 kg).

Shipping Weight (complete system): 43 lb (19.5 kg)

JBL Control 1S Loudspeaker Specifications Frequency Range: 70 Hz - 20 kHz (–10 dB).

Power Capacity: 150 watts (test signal of IEC filtered random noise with a peak-to-average ratio of 6dB, 2 hrs duration).

Sensitivity: 87dB/1W/1m.

Nominal Impedance: 8 ohms.

Net Weight (each): 3.6 kg (8 lb).

Included Accessories: Two 25-ft. speaker cables with spade lugs on the amplifier end and bare wires on the loudspeaker end.

MTC-1A Wall/Ceiling Mount

Optional Accessories:

MTC-2 Plus Wall/Ceiling Mount

MTC-7 American Microphone Stand Adapter

MTC-8 Wall Mount Bracket

For details, see http://www.jblpro.com/pages/ install/cc_surface.htm.

Cooling

Convection cooled.

Protection

Current Limit Protection: Included.

Thermal Limit Protection: Over-temperature thermal cutout.

DC-Fault Load Protection: Included.

Crossover Frequency: 6 kHz.

Components: 135 mm (5 1/4 in) low frequency loudspeaker. 19 mm (3/4 in) polycarbonate dome tweeter.

Enclosure Material: Structural foam.

Finish: Black, grey or white.

Termination: Spring terminal (adapted to accept dual banana plugs).

Dimensions (HxWxD): 235 x 159 x 143 mm (9.25 x 6.25 x 5.625 in.).

ONE-YEAR LIMITED WARRANTY

Crown International, 1718 West Mishawaka Road, Elkhart, Indiana 46517-4095 U.S.A. warrants to you, the ORIGINAL PURCHASER of the 140MAx PACK, for a period of one (1) year from the date of purchase by the original purchaser (the “warranty period”) that the 140MAx PACK is free of defects in materials and workmanship.

See your authorized Crown dealer or the 140MAx PACK operation manual for full warranty disclosure, exceptions and details. For customers outside of the USA, please contact your authorized Crown distribu- tor for warranty information or call 574-294-8200.

Crown International 1718 W. Mishawaka Rd. Elkhart, IN 46517-9439 TEL: 574-294-8200 FAX: 574-294-8FAX www.crownaudio.com

Specifications subject to change without prior notice. Latest information available at www.crownaudio.com.

Crown and Crown Audio are registered trademarks of Crown International. Other trademarks are the property of their respective owners. Printed in U.S.A.

© 2006 Crown Audio®, Inc.

11/06

139772-1

 

 

Image 2
Contents 140MAx Specifications Performance Front Panel Controls and IndicatorsBack Panel Controls, Connectors and Indicators Cooling Included AccessoriesDimensions Protection
Related manuals
Manual 2 pages 63.1 Kb