Gain adjustment | |
THD+N |
Note 2. A weighted. Test conditions: Test signal of – 30dBV amplitude input into microphone input. Input gain slider set to +30dB, Monitor gain slider set to 0dB.
A/D converters: |
|
Type | Cirris Logic CS5361, 24 |
| bit |
Sample Rates | 8, 11.025, 12, 16, |
| 22.05, 24, 32, 44.1, |
| and 48KHz |
THD+N | 90dB (Note 3) |
THD+N | 65dB (Note 3) |
Note 3. A weighted. Microphone gain adjusted for
Power: |
|
Input range | +5VDC to +15VDC |
Power consumption | 5 watts |
Protection | Reverse polarity and |
| overvoltage clamping |
| with self resetting |
| fuse |
Physical: |
|
Size | 7 inches x 4.6 inches |
| x 1.8 inches |
Weight | 1 pound for unit, < |
| 0.5 pounds for power |
| adapter |
Technical Assistance
Technical assistance with this product is available from Antex via:
email: asupport@antex.com
Web: www.antex.com
Phone: (310)
12 Month Limited Warranty
Antex Electronics Corporation (the Company), warrants to the original purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months of the original date of purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s option) without charge for parts and labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (i.e. dated sales receipt), specification of the defect(s), and transportation prepaid to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or damage to other components.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal of any factory applied markings. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE, AND, IN NO
31 |
| 32 |
|