Table of Contents, Parts Checklist | Acesonic KM-112 instruction

®KM-112

Vocal Mixer with Computer Audio Interface

User Manual

NOTE: To ensure your equipment works safely and to its fullest potential, please read this User’s Manual carefully before operating, and keep for future reference.

Thank you for purchasing Acesonic’s KM-112 Vocal Mixer with Computer Audio Interface. At Acesonic, we take pride in providing you with the most advanced, highest quality products on the market. With proper care you will get many years of satisfying use from your Acesonic product.

Table of Contents
Parts Checklist	1
First Things First	1
Care and Cleaning	2
Review of KM-112 Features	2
Technical Specifications	3
Front Panel Operations and Functions	3
Rear Panel Operations and Functions	4
Recording and Playback with Computer	4
Cable Connections and Setup	5
Troubleshooting	6
FCC Advisory and Safety Warnings	7
Using Your KM-112 Safely	7
Parts Checklist
Your Acesonic KM-112 system includes:
• Acesonic HM-702 mic with 14-ft. cable (1)

•USB A-to-B cable (1)

•KM-112 Vocal Mixer and Computer Audio Interface (1)

•RCA cable, RCA red/white/yellow both ends (1)

•Mini-jack-to-RCA cable (1)

•User Manual (1)

•Warranty Registration Card (1)

Be sure to keep original packaging in case re-shipping is required for returns or repairs.

First Things First

Before using your new equipment, there are a few things you should do and know:

•IMPORTANT: Check to see that your local power outlets supply the correct voltage for the AC adapter. Note: Be certain you have selected the correct voltage setting on the rear panel switch before using device.

(See “Rear Panel Operations and Functions” on page 4 and refer to item number 5.)

•Do not dismantle the device on your own. For needed repairs, contact the local distributor or autho- rized service center.

•When the system will not be used for a long time, disconnect the power plug from the wall (as well as the back of the receiver).