Rear Panel Function and Operation
20 | 19 | 18 | 17 | 16 | 15 | 14 13 12 11 | 10 |
cesonic KJV AMPLIFIER | AUX |
|
|
|
|
|
|
|
INPUT |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
S/N | DVD | Cr | Cb | Y |
|
|
|
|
CITY OF INDUSTRY,CA,USA |
|
|
|
| ||||
INPUT |
|
| INPUT/OUTPUT | VIDEO | PC | AUX | DVD | |
acesonic.com |
|
|
|
|
|
|
|
|
VOL |
| MIC 4 |
MONITOR AUDIO OUTPUT |
|
|
OUTPUT |
|
|
AUX | DVD | VIDEO OUT |
1
Cr | Cb | Y | COMPONENT OUTPUT | PC USB |
| PC INPUT | S.VIDEO |
CAUTION |
| UNLOCK |
| UNLOCK |
|
|
|
RISK OF ELECTRIC |
|
|
|
|
| ||
SHOCK DO NOT OPEN |
|
|
|
|
|
|
|
VOLTAGE SELECT |
|
|
|
|
|
|
|
| A |
| LOCK |
| LOCK | A |
|
115V |
|
|
|
|
|
VIDEO INPUT
L
AUDIO INPUT
R
MIC 5
REAR MIC INPUT
2
3
| RIGHT | LEFT |
AC INPUT | AC POWER |
|
~230/115V 50/60Hz | OUTPUT |
|
(MAX 100W) |
| |
| B | B |
| + RIGHT - | - LEFT + |
| SPEAKER | |
FUSE 250V/T10A |
|
|
| GND |
|
AUX | DVD | AUDIO OUT |
|
| |
OUTPUT | PRE | |
HIGH MUSIC
L
R
LOW MIXING
MIC SUB LINE REC INPUT OUTPUT
DO NOT REMOVE LOOP
4
5 | 6 | 7 | 8 | 9 |
1.AC 115/230V SELECT - Voltage selection switch. Push the switch right for 115V, and left for 230V. (Note: different regions of the world use different voltage strengths. Please check to make sure the correct voltage is selected for your area.)
2.AC inlet - Male inlet for power cable.
3.Fuse - Replaceable 250V/T10A fuse to protect the machine.
4.SPEAKER SYSTEM - One set of Speakon connector ports on the top, one set of banana connector ports on the bottom. These two types both provide audio output to stereo external speakers. Banana connector ports designed to be used with bare speaker wire as well as banana connectors. The LEFT and RIGHT outputs each consist of a positive (+, red) and negative
5.MIC OUTPUT jacks - Outputs the microphone signal. High and low ports provide different thresholds of the signal.
6.SUBWOOFER OUTPUT jacks - Music port transfers the
7.LINE OUTPUT jacks - Extract the audio signal to another sound device. 8.REC OUTPUT jacks - Extract the audio signal to sound recording device.
9.EQ L/R INPUT and OUTPUT jacks - For external equalizer connection. Utilize to send and return AM- 825 input signal to and from an external equalizer for further signal processing. Do not take off loop if not using these jacks(Please see page 13 for proper configuration)
10.MICRPHONE #4 & #5 - extra microphone inputs.
11.AUDIO/VIDEO OUTPUT jacks - A set of AUDIO LEFT, AUDIO RIGHT & VIDEO outputs:
R- AUDIO RIGHT RCA output. Connect to the audio right input on an external component. L - AUDIO LEFT RCA output. Connect to the audio left input on an external component. VIDEO - VIDEO RCA output. Connect to the video input on an external component.
12,13.AUDIO/VIDEO INPUT jacks (AUX and DVD)
R- AUDIO RIGHT RCA input. Connect to the audio right output from an external component. L - AUDIO LEFT RCA input. Connect to the audio left output from an external component. VIDEO - VIDEO RCA input. Connect to the video output from an external component.
14.MONITOR AUDIO OUTPUT- provide the audio signal which you choose from one of the monitor inputs(see also Page 5, #6). the volume knob uses to adjust the volume of the audio.
17.PC VIDEO INPUT- additional VIDEO RCA and
*Note- please install the driver before connecting to a computer. Otherwise your computer might not to able to recognize the mixing amplifier(Please see page 13 for more detail).
19.COMPONENT VIDEO OUTPUT jacks - RED, GREEN, BLUE component video RCA outputs. Connect to the red, green and blue component video inputs, respectively, on an external component. 20.COMPONENT VIDOE INPUT jacks(from AUX and DVD input) - RED, GREEN, BLUE component video RCA inputs. Connect to the red, green and blue component video outputs, respectively, from an external component.
7