AUX Return a Level, Effects / AUX RET B Level

A Tour of the MultiMix 2

2TK TO CTRL ROOM Switch

When you engage this switch, the signal coming in from the 2- TRACK jacks is routed to the headphones and to the control room output. This level is controlled by the HDPH / CTRL ROOM level control and cancels out any signal from the main mix.

AUX RETURN A LEVEL

This is the level control for the signal returning to the mixer via

AUX RETURN A.

EFFECTS / AUX RET B LEVEL

If you are using one of the MultiMix-8FX’s internal effects, this knob controls the effect level. If AUX SEND B is connected to an external device, this knob controls the level for AUX RETURN B.

LED Meters

These are the two rows of yellow, green and red lights you see in the master section of the mixer. The LED meters allow you to view the signal level of the main mix and 2-TRACK IN depending on which signal you have routed to the control room mix.

POWER Indicator

When this LED is lit up, that means the POWER ON switch on the rear of the mixer has been activated.

+48V Indicator

When this one is lit up, that means the PHANTOM ON switch on the rear of the mixer has been activated and is supplying +48V phantom power to all XLR mic inputs.

Rear of the Mixer

Here’s what you’ll find at the rear of the mixer.

Power Input

Here’s where you plug in your mixer’s external power supply. You should always connect your power supply to the mixer before you plug the power supply into an electrical outlet.

The POWER INPUT is built to accept only the power supply unit provided with your MultiMix-8FX, or an AC power supply that has the same specs. Others probably will not work.