Important Safety Instructions

Installation Instructions

FOR YOUR SAFETY

WARNING: For personal safety, remove house fuse or open circuit breaker before beginning installation. Failure to do so could result in serious injury or death.

•All rough-in and spacing dimensions must be met for safe use of your range.

•To reduce the risk of burns or fire when reaching over hot surface elements, cabinet storage space above the cooktop should be avoided. If cabinet storage space is to be provided above the cooktop, the risk can be reduced by installing a range hood that protrudes at least 5” beyond the front of the cabinets. Cabinets installed above the cooktop must be no deeper than 13”.

•Be sure your appliance is properly installed and grounded by a qualified technician.

ELECTRICAL REQUIREMENTS

This appliance must be supplied with the proper voltage and frequency, and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or fuse having amperage as noted on rating plate. (Rating Plate is located behind the oven door on the range.)

Rating plate location

We recommend you have the electrical wiring and hookup of your range connected by a qualified electrician. After installation, have the electrician show you where your main range disconnect is located.

Check with your local utilities for electrical codes which apply in your area. Failure to wire your range according to governing codes could result in a hazardous condition. If there are no local codes, your range must be wired and fused to meet the requirements of the National Electrical Code, ANSI/NFPA No. 70— Latest Edition. You can get a copy by writing:

National Fire Protection Association

Batterymarch Park

Quincy, MA 02269

Effective January 1, 1996, the National Electrical Code requires that new, but not existing, construction utilize a four-conductor connection to an electric range. When installing an electric range in new construction, a mobile home, recreational vehicle or an area where local codes prohibit grounding through the neutral conductor, follow the instructions in the section on NEW CONSTRUCTION

AND FOUR-CONDUCTOR BRANCH CIRCUIT CONNECTION.

You must use a three-wire, single-phase A.C. 208Y/120 Volt or 240/120 Volt, 60 hertz electrical system. If you connect to aluminum wiring, properly installed connectors approved for use with aluminum wiring must be used.

131-10595-2 1-07 JR, JDS28, JDP39 specifications

The GE JDP39 and JDS28 series, including model 131-10595-2 1-07 JR, represent significant advancements in the realm of electronic instrumentation and components, essential for various industrial applications. These models are part of General Electric's ongoing commitment to innovation and reliability in technology.

One of the standout features of the JDP39 and JDS28 models is their robustness in harsh environments. Designed with durability in mind, these devices can withstand extreme temperatures, humidity, and vibration, making them ideal for use in sectors such as aerospace, manufacturing, and power generation. The materials used in their construction ensure longevity and reliable performance under stress.

In terms of technology, the GE JDP39 model employs advanced signal processing capabilities. This enables high accuracy and rapid response times in measurement applications. The devices incorporate state-of-the-art sensors that provide precise data, which is crucial for monitoring and controlling various industrial processes. This level of precision is particularly beneficial in applications where safety and efficiency are paramount.

The JDS28 series is known for its user-friendly interface and ease of integration with existing systems. Designed with operators in mind, these devices feature intuitive controls and clear displays that ensure quick adaptation and minimal training period for users. Furthermore, they support various communication protocols, facilitating seamless integration into modern automated systems.

Power efficiency is another significant characteristic of the GE JDP39 and JDS28 models. With a focus on reducing energy consumption without compromising performance, these devices utilize advanced power management technologies. This not only lowers operational costs but also aligns with global initiatives aimed at promoting energy sustainability.

Additionally, GE has incorporated advanced diagnostic features into these models. Users can access real-time data and alerts regarding the operational status, enabling proactive maintenance and reducing downtime. This predictive capability is vital for organizations seeking to enhance their operational efficiency and minimize unexpected failures.

In conclusion, the GE JDP39, JDS28, and the 131-10595-2 1-07 JR model embody the intersection of durability, advanced technology, and user-friendly design. Their features make them an indispensable choice for industries requiring reliable instrumentation that can perform consistently under challenging conditions. As industries continue to evolve and embrace automation, these devices stand out as essential tools for achieving operational excellence.