Rear Panel Function and Operation

MIC 3 INPUT

cesonic KARAOKE AMPLIFIER

MODEL:AM-145 INPUT:AC115V-230V

S/N

CITY OF INDUSTRY,CA,USA acesonic.com

VCD

TAPE

DVD

VIDEO OUT

VIDEO

INPUT

OUTPUT

AUDIO

INPUT

R					R
VCD	TAPE	DVD	AUDIO OUT	LINE	SUB

+ RIGHT -

- LEFT +

SPEAKER SYSTEM(4-8 次 )

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTORE

GND

VOLTAGE SELECT

115V

AC INPUT ~230/115V 50/60Hz

AC 115V INPUT FUSE 250V/T5A

AC 230V INPUT FUSE 250V/T2.5A

1.MIC #3 INPUT jack - 1/4 inch inputs for microphones. AUDIO/VIDEO INPUT jacks 2.VIDEO INPUT jacks (VCD,TAPE and DVD) -VIDEO RCA inputs for these three source inputs. 3.AUDIO INPUT jacks (VCD,TAPE and DVD) -Each columm consists of a complete set of AUDIO LEFT & AUDIO RIGHT RCA inputs.

R- AUDIO RIGHT RCA input. Connect to the audio right output from an external component. L - AUDIO LEFT RCA input. Connect to the audio left output from an external component.

4.AUDIO OUTPUT jacks-

R- AUDIO RIGHT RCA output. Connect to the audio right input on an external component. L - AUDIO LEFT RCA output. Connect to the audio left input on an external component.

5.VIDEO OUTPUT jacks-VIDEO RCA output. Connect to the video input on an external component like TV or monitor.

6.AUDIO LINE OUTPUT jacks- AUDIO RCA outputs provide line audio signal to other external component like another amplifier.

7.SUB WOOFER LINE OUTPUT jacks- AUDIO RCA outputs provide line audio signal to other external sub woofer component.

8.SPEAKER SYSTEM - One set of banana connector ports provide audio output to stereo external speakers. Banana connector ports designed to be used with bare speaker wire as well as banana connectors. The LEFT and RIGHT outputs each consist of a positive (+, red) and negative (-, black) signal that correspond with the inputs on each speaker. (Please see connection diagram on page 8 for proper configuration)

9.POWER FUSE-Replaceable 250V/T10A fuse to protect the machine in 110V using condition. 10.AC inlet - Male inlet for power cable.

11.AC 115/230V SELECT - Voltage selection switch. Push the switch right for 115V, and left for 230V. (Note: different regions of the world use different voltage strengths. Please check to make sure the correct voltage is selected for your area.)

16.COMPONENT VIDEO OUTPUT jacks - RED, GREEN, BLUE component video RCA outputs. Connect to the red, green and blue component video inputs, respectively, on an external component.

17.COMPONENT VIDOE INPUT jacks(from BGM and DVD input) - RED, GREEN, BLUE component video RCA inputs. Connect to the red, green and blue component video outputs, respectively, from an external component.