Humminbird AMX-220FX user manual Ready to START?

Page 7

3.READY TO START?

3.1Please check the AC voltage available in your country before connecting your AMX-220/AMX-220FX to the AC socket.

3.2Be sure that the main power switch is turned off before connecting the mixer to the AC socket. Also, you should make sure that all input and output controls are turned down. This will avoid damage to your speakers and avoid excessive noise.

3.3Before turning on the AMX-220/AMX-220FX you shall connect it to a power amplifier and turn-on the mixer BEFORE the power amplifier. Once you have finished your working session you shall turn the mixer off AFTER the power amplifier.

3.4Before disconnecting the AMX-220/AMX-220FX always turn-off the power switch.

3.5Do not use solvents to clean your AMX-220/AMX-220FX. A dry and clean cloth will be OK.

6

Image 7
Contents AMX-220/ AMX-220FX External Connection Power SupplyDo Not Remove Any Covers Preface Table of Contents Introduction Features Ready to START? AMX-220 Control ElementsAMX-220FX Mono MIC/LINE Channels Phantom Power +48 VoltInput Level Setting LOW CUT SwitchMID-LOW10 MUTE/ALT3-4 Switch & LED IndicatorEqualizer HI-MID9Stereo AUX Returns Solo Switch & LED Indicator14 2-TRACK IN/OUT Tape Tape OUTALT 3-4 Control AUX SendsAUX Return Control EFX to AUX137 24 BIT Digital Effects For AMX-220FX Model Presets ControlMain MIX Level PHONES/CONTROL RoomRear Panel Description AC Input ConnectorInstallation and Connection Stereo TRS Jack Plug Some Final Tips on Wiring ConfigurationTapped Connection Direct Output Lead Modification on mono and stereo channels For the Experts WHO Want to Know MoreVOCAL2 VOCAL1Large Hall Large Room Small HallPlate Small RoomTape Reverb Spring Reverb Mono DelayFlanger Stereo DelayChorus REVERB+FLANGER REVERB+DELAYREVERB+CHORUS System Block Diagram DSP Section Technical SpecificationTerms and Conditions WarrantyWarranty Registration Card Return NoticeNo.1, Lane 17, Sec , Han Shi West Road, Taichung, 401 Taiwan