The echo is applied to the sound before all the inputs are mixed.
Set ECHO to MIC to turn on the echo effect for the microphones and the AUX LINE input.
Set ECHO to MUSIC to turn on the echo effect for Channels 1, 2, 3, and 4 outputs.
To turn off the echo effect, set ECHO to OFF.
Adjusting the Echo Delay, Repeat, and Volume
Thecontrol lets you adjust the time delay for an echo. Set ECHO DELAY to 0 for a minimum time delay and to 10 for a maximum time delay.
Thecontrol lets you control the length of time a tone is repeated (rever-
beration). Setto 10 for the longest time repeat and to 0 for the shortest.
Thecontrol lets you adjust the output level of the echo effect. Rotate ECHO LEVEL toward 10 to increase the echo level and toward 0 to decrease it.
USING SOUND EFFECT DEVICES
Playing the Signal from the Sound Effect Device
To play signals from a device connected to the EFFECT jacks, set the RECEIVE switch to ON. When you are not using the connected inputs, set the RECEIVE switch to OFF.
Rotate RECEIVE to adjust the volume of the input connected to the EFFECT jacks without changing the sound effect device's volume. Rotate RECEIVE toward 10 to increase the volume and toward 0 to decrease it.
Playing Input Signals through the Sound Effect Device
You can play inputs selected by the channel selectors, DJ MIC, or AUX through other sound effect devices connected to the mixer, such as an echo reverb or a digital sampler processor, and control playback through the mixer. To play selected inputs through the sound effect device, set SEND ASSIGN to the selected input.
The SEND control lets you adjust the volume of the selected sound to the sound effect de- vice without changing the device's volume. Rotate SEND toward 10 to increase the vol- ume and toward 0 to decrease it.
Operation | 13 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|