NHT X2 owner manual „ Specifications

„Specifications

X2

Active Crossover

Frequency response: 15Hz - 220Hz +/-3dB through L/R input (continuously variable)

15 - 220Hz +/-3dB through LFE input (fixed) 50, 80, 110Hz-100KHz +/-3dB

Distortion: < 0.01% subwoofer output @ 100Hz, 1V < 0.001% hi-pass output @ 1KHz, 1V

Signal to noise ratio: >105dB at Hi-pass output >100dB at subwoofer output

Crossover: Low-pass continuously variable between 30-220Hz, 12dB/octave

Low-pass fixed at 220Hz,12dB/octave

High-pass selectable between 50, 80, 110Hz, 12dB/octave

Input connectors:

Gold plated RCA jacks for L and R line level input

XLR jacks for L and R line level input

Gold plated RCA jack for LFE input

XLR jack for LFE input

Detachable terminal block for external trigger in/thru 2.1mm x 5.5mm x 9.5mm power connector

Output connectors:

Gold plated RCA jacks for L and R line level high-pass output

Gold plated RCA jack for LFE thru

XLR jacks for L and R line level high-pass output

Gold plated RCA jacks for L and R line level sub woofer output

XLR jacks for L and R line level subwoofer output

Phase Control:

Variable between 0 and 90 degrees

Switchable 0 - 180 degrees

Gain Control: +10dB and 0dB subwoofer input sensitivity

Stereo / Mono Switch: Stereo or mono subwoofer operation

Standby Mode: Selectable internal and external. External 5 -24 VDC

Internal automatic when no signal is present for >20 minutes

Power Consumption: 3W

Weight: 9 lbs.

Dimensions: 1.5"H x 17"W x 11.5"D

Finish: matte black anodized front panel, black painted chassis