Stow MS-40M operation manual Rules for Safe Operation, General Safety

Page 7

CAUTION:

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the MS-40M mixer:

GENERAL SAFETY

DO NOT operate or service this equipment before reading this entire manual.

This equipment should not be operated by persons under 18 years of age.

NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel- toed boots and other protective devices required by the job.

NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.

NEVER operate this equipment under the influence or drugs or alcohol.

NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

Manufacture does not assume responsibility for any accident due to equipment modifications.

Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

Always check the machine for loosened threads or bolts before starting.

RULES FOR SAFE OPERATION

NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before

servicing engine or mixer.

HighTemperatures – Allow the engine to cool before adding fuel or performing service and maintenance functions. Contact with hot components can cause serious burns.

The engine section of this mixer requires an adequate free flow of cooling air. Never operate the mixer in any enclosed or

narrow area where free flow of the air is restricted. If the air flow is restricted it will cause serious damage to the mixer or engine and may cause injury to people. Remember the mixer's engine gives off DEADLY carbon monoxide gas.

Always refuel in a well-ventilated area, away from sparks and open flames.

Always use extreme caution when working with flammable liquids. When refueling, stop the engine and allow it to cool. DO NOT smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

NEVER operate the mixer in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death.

STOW MS-40M — PARTS & OPERATION MANUAL — REV. #1 (05/17/02) — PAGE 7

Image 7
Contents PLASTER/MORTAR Mixers Page Heres HOW to GET Help Engines UPS Ground Service at no charge for freight Parts Ordering ProceduresMachine Safety Decals Operation and Safety DecalsRules for Safe Operation General SafetyRules for Safe Operation Maintenance SafetyEmergencies MS-40M Mechanical Mixer MS-40M SpecificationsMS-40M General Information Mixer MS-40M ControlsElectric Motor Connection Electric Motor Wiring InformationMS-40M Electric Motor Electric MotorStep MS-40M TowingCheck the following before towing Paddle Blade Adjustment, Steel Drum MS-40M Paddle Blade AdjustmentMS-40M Mechanical Mixer Note MS-40M Initial START-UP Stopping the Mixer gasoline MS-40M Initial START-UPMixing Starting the Electric MotorMS-40M Maintenance Clutch Adjustment Mechanical 12 CF Mixer MS-40M MaintenanceClutch Adjustment Procedure Engine Troubleshooting Symptom Possible Problem Solution MS-40M Troubleshooting EngineMS-40M Troubleshooting ENGINE/MIXER Items Found In the Items Number Column MS-40M- Explanation of Code in Remarks ColumnMS40M 1 to 3 Units MS40M 5 to 10 Units MS-40M- Suggested Spare PartsMS-40M Engine Side Paddle Assy Paddle ARM Engine Side MS-40M TOW Side Paddle Assy MS-40M TOW Side Paddle Assy MS-40M Paddle Shaft Assy MS-40M Paddle Shaft Assy MS-40M Steel Drum Assy WASHER, FLAT, 1/2 USS MS-40M CAB Assy MS-40M CAB Assy MS-40M FRAME, WHEEL, Tire and HUB Assy Frame W/A MS-40M FRAME, WHEEL,TIRE and HUB AssyMS-40M Name Plate and Decals See Decal Illustrations on MS-40M Honda Engine Assy 11HP Honda Engine MS-40M Electric Motor Assy HP 1 Phase Elect Motor MS-40M Transmission Assy Shifter Shaft Terms and Conditions of Sale Parts Page Multiquip INC