VocoPro CLUB-6800 VP-600 PRO to VX-15 speakers, Connecting Microphones to the KJM-8000 PRO

4 VP-600 PRO to VX-15 speakers

Using two 9’ MDP (Banana Plug) to ¼” speaker cables

1. Connect the MDP end to CH.B on the rear panel of the

VP-600 PRO Amplifier

STEREO 300W

PER CHANNEL

INTO 4 OHM

BRIDGED OUTPUTS

VP-600 PRO and

600W MONO

BALANCED

2.	Connect the ¼” end to one of the two VX-15’s.
3.	Repeat this for the second speaker, except now connect
the MDP end to CH. A on the VP-600 PRO.

BRIDGED INTO 8 OHM

CH. B	CH. A	CH. B	CH. A MONO
		STEREO	MONO
			BRIDGE
MODEL VP-600 PRO		INPUTS

VX-15 Speaker #1 VX-15 Speaker #2

5 Connecting Microphones to the KJM-8000 PRO

Using either a mic cable with two XLR ends (Fig. A) or an XLR to ¼” cable (Fig. B):

Connect the microphone cables to the MIC inputs on the rear panel of the KJM-8000 PRO.

CDG(1)

DVD(2)

LD(3)

KJM-8000 PRO Mixer

CDG(1)

DVD(2)

LD(3)

6 Adding the VSP-M1 to the CLUB-6800 system

Using either a mic cable with two XLR ends or an XLR to ¼” cable:

1.Connect the XLR(f) end to the LEFT BALANCED OUTPUT on the rear panel of the VSP-M1.

2.Connect the XLR(m) or ¼” end to MIC input 1 on the rear panel of the KJM-8000 PRO.

3.Follow the above steps, now going from the RIGHT BALANCED OUTPUT on the VSP-M1 to MIC input 2 on the rear panel of the KJM-8000 PRO.

4.Connect the mics to the mic inputs on the rear panel of the VSP-M1.

VSP-M1 Processor

CDG(1)

DVD(2)

KJM-8000 PRO Mixer

LD(3)